Summary for Test 2021-12-03-18-3
Test performed: CTM 670-December 2013Project Information
Project Identifiers | Project ID: 215093 DEA: 101C2804 EFIS: 1014000134 |
---|---|
DIST-CO-RTE-PM | 10-SJ-99-30.9/31.3 |
Award Date | 10/21/2020 |
Closeout Date | 08/30/2023 |
Work Description | RAISED BRIDGES, REALIGN RAMPS AND CONSTRUCT AUXILIARY LANE. |
Location Description | SAN JOAQUIN COUNTY IN LODI FROM 0.4 MILE SOUTH OF ROUTE 12/99 SEPARATION TO 0.3 MILE SOUTH OF TURNER ROAD OVERCROSSING |
QA Service Level | 1 (Verified on 08/21/2020) |
Sample Information
Sample Taken Date | 12/03/2021 | Sample Unique Key | 18 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/07/2021 |
Sample type | Quality Assurance | A brief description of the sample | #11 BarGrip XL Couplers |
The quantity of what the sample constitutes | 150 Couplers | From where was the sample collected | Fabricator |
First name of sampler or witnessed by | Unknown | Last name of sampler or witnessed by | Unknown |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Camblin Steel | Transportation Laboratory (TL) Number | C710176 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | SMTL TM5 - Couplers | Production or Authorization Testing | Production Testing |
---|---|---|---|
Service or Ultimate | Ultimate | Material Standard Code | ASTM A706 |
Material Grade | 60 | Rebar Manufacturer | Nucor |
Coupler Manufacturer | BarSplice | Intermediate Assembler or Fabricator | |
Rebar Size | #11 | Coupler Model | BarGrip XL |
Coating Standards | Uncoated | Shape of Rebar | Straight |
Rebar Hoop Diameter | Rebar Hoop Fabricator | ||
Coupler Component Heat/Lot Number(s) | A200349 | Rebar Heat Number(s) | 3500009146 |
Rebar Size 2 | Coupler Unique ID | Not set |
Test Details
DIME Sample ID: 2021-12-03-18
DIME Test ID: 2021-12-03-18-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Cyclical/Fatique Tensile with Slip)
Test Release Date: 2021-12-09
Test Results
Number of Samples Tested: 1
Input Type: Measured
Tester's full name: spaine
Date of test: 12/08/2021
UTM: 400kip
Temperature: 72.00 f
Halo ID:
Num | Sample | Number of Cycles | Size | Mfg. Lot Number(s) | Slip (inch) | Area (sqin) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
---|---|---|---|---|---|---|---|---|---|---|
1 | 3 | No. 11/36mm | 1 | 0 | 1.56 | 152888 | 98005 | ok necking | spaine |
General comments (publicly viewable) (Max 1000 characters): ok necking
Test Graph
Source: Bluehill Data Point File
WARNING: position or load not found in data points imported from Instron machine.
Test was verified on 12/9/2021 ✔