Summary for Test 2021-09-09-46-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 214586 DEA: 081H7704 EFIS: 0817000132 |
---|---|
DIST-CO-RTE-PM | 08-SBD-215-4.5/5.8 |
Award Date | 06/10/2020 |
Closeout Date | 05/26/2022 |
Work Description | INSTALL SIGN STRUCTURE, HMA, MODIFY RAMP METERING AND RETAINING WALL. |
Location Description | SAN BENARDINO COUNTY IN SAN BERNARDINO FROM 0.5 MILE SOUTH OR ORANGE SHOW ROAD/AUTO PLAZA DRIVE OVERCROSSING TO 0.2 MILE NORTH OF INLAND CENTER DRIVE OVERCROSSING |
QA Service Level | 1 (Verified on 04/16/2020) |
Sample Information
Sample Taken Date | 09/09/2021 | Sample Unique Key | 46 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/08/2021 |
Sample type | Quality Assurance | A brief description of the sample | 1 x 4 PCC Aggregate |
The quantity of what the sample constitutes | 1 bag | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | dizhou | Last name of sampler or witnessed by | OU |
Title of sampler | TET | Telephone number of sampler | |
Laboratory sample identification | test 1 70 cy out at 1214 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Cemex Lytle Creek | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0068::REDLANDS WASH PLAN (CEMEX) |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | At the plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1-1/2 inch | |
The concrete mix design number | 1610974 | Lot number | |
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-09-09-46
DIME Test ID: 2021-09-09-46-1
Testing Lab: CT D08 - Barstow Field Laboratory 1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2021-11-03
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: OMAR GALVAN
Date of test: 09/10/2021
Cumulative percent passing the 2 in. sieve: 0 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 97 %
Cumulative percent passing the 3/4 in. sieve: 71 %
Cumulative percent passing the 1/2 in. sieve: 0 %
Cumulative percent passing the 3/8 in. sieve: 25 %
Cumulative percent passing the #4 sieve: 6 %
Cumulative percent passing the #8 sieve: 4 %
Cumulative percent passing the #16 sieve: 62 %
Cumulative percent passing the #30 sieve: 41 %
Cumulative percent passing the #50 sieve: 20 %
Cumulative percent passing the #100 sieve: 8 %
Cumulative percent passing the #200 sieve: 3 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/3/2021 ✔