DIME - Test Summary

Summary for Test 2021-09-28-9-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 214920 DEA: 073W8704 EFIS: 0717000118
DIST-CO-RTE-PM	07-LA-1-46.9/50.4
Award Date	06/09/2020
Closeout Date	07/03/2023
Work Description	PERFORM SLURRY SEAL, REPLACE AC SURFACING AND INDIVIDUAL SLABS.
Location Description	LOS ANGELES COUNTY IN AND NEAR MALIBU FROM MALIBU LAGOON BRIDGE TO SOLISTICE CANYON CREEK BRIDGE
QA Service Level	1 (Verified on 04/07/2021)

Sample Taken Date	09/28/2021	Sample Unique Key	9
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	10/01/2021
Sample type	Verification	A brief description of the sample	PSUE 3/4" WMA-A-SP R25 0.25% Evotherm
The quantity of what the sample constitutes	2 Bags of Coldfeed Aggregate, 1 Bag of RAP	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Robert	Last name of sampler or witnessed by	RJ Noble QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0566A-21	Linked DIME Sample ID
The fabricator/manufacturer/facility name	RJ Noble Orange	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0035::EAGLE VALLEY QUARRY
The fabricator's/manufacturer's product name for the sample	3/4 WMA-A-SP R25	The fabricator/manufacturer designation for the sample
The plant number	36R2508SPWEO	A detailed description of where the material sample was collected	Belt Cut at RJ Noble Orange Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-09-28-9

DIME Test ID: 2021-09-28-9-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-10-11

Input Type: Measured

Tester's full name: Friday Ofoegbu

Date of test: 10/04/2021

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 975.2 grams

Mass of the pycnometer with water (B): 663.7 grams

Mass of the oven dried sample (before pycnometer) (A): 493.4 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 493.4 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.618

Bulk specific gravity (SSD Basis): 2.653

Apparent specific gravity: 2.712

Absorption: 1.3 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/11/2021 ✔