Summary for Test 2021-09-09-18-2

Test performed: AASHTO T84-14
Warning: The test results shown on this page have been superseded and are invalid. This information is for reference only. Please click this link to view the corrected test.

Project Information

Project IdentifiersProject ID: 215687
DEA: 074W6104
EFIS: 0719000104
DIST-CO-RTE-PM07-LA-18-0.0/4.5
Award Date05/26/2021
Closeout Date10/06/2022
Work DescriptionPLACE RUBBERIZED HMA (GAP GRADED).
Location DescriptionLOS ANGELES COUNTY NEAR LLANO FROM SAN BERNARDINO COUNTY LINE TO JUNCTION ROUTE 138
QA Service Level1 (Verified on 07/01/2021)

Sample Information

Sample Taken Date09/09/2021 Sample Unique Key18
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/10/2021
Sample typeVerification A brief description of the samplePSUE 1/2" RHMA-G 0.5% LAS
The quantity of what the sample constitutes4 Bags of Combined Aggregate From where was the sample collectedManufacturer
First name of sampler or witnessed byWilliam Last name of sampler or witnessed byLucas
Title of sampler Telephone number of sampler
Laboratory sample identification0524G-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameGranite Construction Company Llano Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-19-0046::BIG ROCK CREEK- GRANITE
The fabricator's/manufacturer's product name for the sample1/2 RHMA-G-SP The fabricator/manufacturer designation for the sample
The plant number1346 A detailed description of where the material sample was collectedBelt Cut At Granite Construction Co Llano
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size1/2 inch
The concrete mix design number Lot number2
Sublot number1 Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2021-09-09-18
DIME Test ID: 2021-09-09-18-2
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-09-22

Test Results


Input Type: Measured
Tester's full name: Danilo Ferrer
Date of test: 09/15/2021
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 968.5 grams
Mass of the pycnometer with water (B): 653.3 grams
Mass of the oven dried sample (before pycnometer) (A): 496.6 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 496.6 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.687
Bulk specific gravity (SSD Basis): 2.706
Apparent specific gravity: 2.738
Absorption: 0.7 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 9/22/2021

Warning: The test results shown on this page have been superseded and are invalid. This information is for reference only.