Summary for Test 2021-08-31-35-3

Test performed: AASHTO T315-20

Project Information

Project IdentifiersProject ID: 215530
DEA: 051N1704
EFIS: 0520000136
DIST-CO-RTE-PM05-SB-135-1.0/R7.2
Award Date04/12/2021
Closeout Date05/24/2022
Work DescriptionConstruct pavement using partial depth recycling and pave with RHMA
Location DescriptionCONSTRUCTION ON STATE HIGHWAY IN SANTA BARBARA COUNTY NEAR LOS ALAMOS FROM 0.3 MILE NORTH OF DEN STREET TO SAN ANTONIO CREEK BRIDGE
QA Service Level1 (Verified on 09/16/2021)

Sample Information

Sample Taken Date08/31/2021 Sample Unique Key35
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/07/2021
Sample typeAcceptance A brief description of the sampleAsphalt Binder PG 64-10
The quantity of what the sample constitutes2 cans - load 8 From where was the sample collectedJob Site
First name of sampler or witnessed byJustin Last name of sampler or witnessed byLong
Title of samplerConsultant Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameGranite Construction Transportation Laboratory (TL) Number210831A
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-10
ModifiedNo Lot number
Sublot number Tank number
Time of sample HMA SupplierGranite
Certified Asphalt SupplierValero Marketing & Supply - Wilmington CA MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2021-08-31-35
DIME Test ID: 2021-08-31-35-3
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-09-15

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 09/08/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.363 kPa
Phase Angle (δ) (for the 10 cycles): 82.0 degree
Complex Modulus (G*) (for the 10 measurements): 3.628 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 3.66 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications RTFO

Test was verified on 9/15/2021