Summary for Test 2021-08-30-29-3
Test performed: AASHTO T30-19Project Information
Project Identifiers | Project ID: 215393 DEA: 021J5104 EFIS: 0220000086 |
---|---|
DIST-CO-RTE-PM | 02-LAS,MOD-139-57.0/66.635,0.0/0.1 |
Award Date | 02/10/2021 |
Closeout Date | 11/24/2021 |
Work Description | PERFORM COLD IN-PLACE RECYCLING AND PLACE HOT MIX ASPHALT (TYPE A). |
Location Description | LASSEN AND MODOC COUNTIES NEAR ADIN FROM 4.5 MILES SOUTH OF COUNTY ROAD A2 TO 0.1 MILE SOUTH OF ROUTE 299 |
QA Service Level | 1 (Verified on 01/07/2021) |
Sample Information
Sample Taken Date | 08/30/2021 | Sample Unique Key | 29 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/31/2021 |
Sample type | Acceptance | A brief description of the sample | 3/8 inch RAP |
The quantity of what the sample constitutes | PSE 1 bag at 286 Tons | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | E. | Last name of sampler or witnessed by | Chavez |
Title of sampler | Materials Tester | Telephone number of sampler | |
Laboratory sample identification | D78933 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Hat Creek Construction and Materials - Shaw Pit Facility - Lookout, CA | Transportation Laboratory (TL) Number | 848954 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Reclaimed Asphalt Pavement | RAP Source | Hat Creek Construction and Materials, Shaw Pit Facility, Lookout, CA |
---|---|---|---|
Aggregate Size | 3/8 inch | Aggregate Source | Hat Creek Construction |
RAP Stockpile | Continuous | Stockpile Size (tons) | Unknown |
Reclaimed Asphalt Pavement Mix Number | Not set |
Test Details
DIME Sample ID: 2021-08-30-29
DIME Test ID: 2021-08-30-29-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2021-09-09
Test Results
Does this test use 1/4 sieve?: Yes
Is an aggregate correction factor used?: No
Input Type: Measured
Tester's full name: Karen Dorado
Date of test: 09/01/2021
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
1540 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
8.0 grams | 99.5 % | |||||
185.5 grams | 88 % | |||||
330.8 grams | 78.5 % | |||||
643.3 grams | 58.2 % | |||||
882.6 grams | 42.7 % | |||||
1045.7 grams | 32.1 % | |||||
1165.9 grams | 24.3 % | |||||
1260.4 grams | 18.2 % | |||||
1329.9 grams | 13.6 % |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/9/2021 ✔