Summary for Test 2021-08-30-6-7
Test performed: ASTM A615-15Project Information
| Project Identifiers | Project ID: 209820 DEA: 04297634 EFIS: 0415000040 COOP: 042548 |
|---|---|
| DIST-CO-RTE-PM | 04-ALA-84,680-17.9/21 |
| Award Date | 02/19/2021 |
| Closeout Date | Not set |
| Work Description | ROUTE 84 WIDENING (4-LANE EXPRESSWAY) FROM I-680 TO PIGEON PASS, INCLUDING INTERSECTION, DRAINAGE IMPROVEMENTS AND UTILITY RELOCATION. |
| Location Description | ALAMEDA COUNTY IN AND NEAR SUNOL, PLEASANTON, AND LIVERMORE ON ROUTE 84 FROM 0.1 MILE EAST OF ROUTE 680 TO 0.1 MILE SOUTH OF RUBY HILL DRIVE AND ON ROUTE 680 FROM 1.2 MILES SOUTH TO 1.8 MILES NORTH OF ROUTE 84 |
| QA Service Level | 1 (Verified on 11/04/2019) |
Sample Information
| Sample Taken Date | 08/30/2021 | Sample Unique Key | 6 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/02/2021 |
| Sample type | Quality Assurance | A brief description of the sample | #8 Threaded Bar and #9 Cast Hex Nuts |
| The quantity of what the sample constitutes | 2 per heat | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Brian | Last name of sampler or witnessed by | Murray |
| Title of sampler | QA Inspector | Telephone number of sampler | 213 435 4055 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Dywidag Systems | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L140-212-21 | Structure unique identifier | |
| Structure name |
Material Information
| Material Type | SMTL TM5 - Threaded Bar | Production or Authorization Testing | Authorization Testing |
|---|---|---|---|
| Threaded Bar Specification | ASTM A615 | Threaded Bar Grade | 75 |
| Threaded Bar Type | Deformed | Rebar Size | #9 |
| Nut Specification for Threaded Bar | ASTM A897 | System Manufacturer | DSI |
| Epoxy Coating Color | NA | Threaded Bar Application | |
| Coating Standards | Uncoated | Bar Heat Number(s) | 61215292002, 6215292002, 6215292202 and 62152 |
| Nut Heat Number(s) | G130 and C041 | Bar Lot Number | n/a |
| Nut Lot Number | n/a | Coupler Heat Number(s) | n/a |
| Coupler Grade | n/a |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-08-30-6
DIME Test ID: 2021-08-30-6-7
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A615-15: Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement (Tensile)
Test Release Date: 2021-09-07
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: fsaylor
Date of test: 09/03/2021
UTM: 400kip
Temperature: 72 f
| Num | Sample | Size | Mfg Lot | Area (sqin) | Tensile Strength (psi) | Stress at Offset (psi) | Total Elongation (%) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|
| 1 | No.9/29mm | 1 | 114044 | 80083 | 8.09 | A615 Bar & Nut Nut Stripped Made Elongation | fsaylor |
General comments (publicly viewable) (Max 1000 characters): A615 Bar & Nut Nut Stripped Made Elongation
Test Graph
Source: Bluehill Data Point File
WARNING: strain or stress not found in data points imported from Instron machine.
Test was verified on 9/7/2021 ✔