Summary for Test 2013-08-15-9008117-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 3951 DEA: 07202114 EFIS: 0700020869 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-710-17.2/26.4 |
| Award Date | 04/04/2012 |
| Closeout Date | 06/16/2021 |
| Work Description | PAVE ROADWAY WITH LONG LIFE PAVEMENT AND WIDEN ROADWAY AND BRIDGES |
| Location Description | LOS ANGELES COUNTY ON ROUTE 710 AT VARIOUS LOCATIONS FROM LOS ANGELES RIVER BRIDGE TO RAMONA BOULEVARD UNDERCROSSING |
| QA Service Level | 1 (Verified on 11/27/2012) |
Sample Information
| Sample Taken Date | 08/15/2013 | Sample Unique Key | 9008117 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/16/2013 |
| Sample type | Acceptance | A brief description of the sample | Class 3 Aggregate Base |
| The quantity of what the sample constitutes | 2 Bags | From where was the sample collected | Other |
| First name of sampler or witnessed by | Unknown | Last name of sampler or witnessed by | Unknown |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | 3228B | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | SB Median 710 | Transportation Laboratory (TL) Number | Unknown |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA or name of Pit) | None |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Class 3 Aggregate Base | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | SMSJV Yard at Atlantic Blve SB 710 |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2013-08-15-9008117
DIME Test ID: 2013-08-15-9008117-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2015-02-19
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Nader Rashidi
Date of test: 08/22/2013
Cumulative percent passing the 3 in. sieve: 100 %
Cumulative percent passing the 2 1/2 in. sieve: 100 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 97 %
Cumulative percent passing the 3/4 in. sieve: 92 %
Cumulative percent passing the 1/2 in. sieve: 81 %
Cumulative percent passing the 3/8 in. sieve: 74 %
Cumulative percent passing the #4 sieve: 57 %
Cumulative percent passing the #8 sieve: 45 %
Cumulative percent passing the #16 sieve: 37 %
Cumulative percent passing the #30 sieve: 30 %
Cumulative percent passing the #50 sieve: 22 %
Cumulative percent passing the #100 sieve: 15 %
Cumulative percent passing the #200 sieve: 10 %
General comments (publicly viewable) (Max 1000 characters): CT 202 meets grading specifications.
Test was verified on 2/19/2015 ✔