Summary for Test 2021-08-18-18-1
Test performed: AASHTO T59-16Project Information
| Project Identifiers | Project ID: 215572 DEA: 032G1104 EFIS: 0320000230 |
|---|---|
| DIST-CO-RTE-PM | 03-GLE-162-66.6/76.3 |
| Award Date | 05/06/2021 |
| Closeout Date | 06/27/2022 |
| Work Description | PLACE RHMA AND COLD IN-PLACE RECYCLE. |
| Location Description | GLENN COUNTY IN AND NEAR WILLOWS FROM 0.2 MILE EAST OF N SHASTA STREET TO 1.0 MILE EAST OF ROAD X |
| QA Service Level | 1 (Verified on 03/22/2021) |
Sample Information
| Sample Taken Date | 08/18/2021 | Sample Unique Key | 18 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/19/2021 |
| Sample type | Department Acceptance | A brief description of the sample | ss1h |
| The quantity of what the sample constitutes | 1 jug | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Joe | Last name of sampler or witnessed by | R |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Pacific Northwest Oil - Stockton, CA | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Asphaltic Emulsion | Emulsion Grade | SS-1h |
|---|---|---|---|
| Lot Number | Not set | Sub Lot | Not set |
| Dilution Percentage Rate | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-08-18-18
DIME Test ID: 2021-08-18-18-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T59-16: Standard Method of Test for Emulsified Asphalts (Emulsified Asphalt Residue Evap. (Sec. 7))
Test Release Date: 2021-08-23
Test Results
How many beakers will be used to conduct the test?: 4
Input Type: Measured
Tester's full name: Minoo Ahmadi
Date of test: 08/22/2021
Beaker 1 Mass of beaker, rod, screen (if used), and residue: 449.5 g
Beaker 1 Tare mass of the beaker, rod, and screen (if used): 419.7 g
Beaker 2 Mass of beaker, rod, screen (if used), and residue: 293.6 g
Beaker 2 Tare mass of the beaker, rod, and screen (if used): 263.7 g
Beaker 3 Mass of beaker, rod, screen (if used), and residue: 299.0 g
Beaker 3 Tare mass of the beaker, rod, and screen (if used): 269.2 g
Beaker 4 Mass of beaker, rod, screen (if used), and residue: 451.1 g
Beaker 4 Tare mass of the beaker, rod, and screen (if used): 421.3 g
Beaker 1 Residue: 59.6 %
Beaker 2 Residue: 59.8 %
Beaker 3 Residue: 59.6 %
Beaker 4 Residue: 59.6 %
Percentage of residue: 60 %
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications
Test was verified on 8/23/2021 ✔