Summary for Test 2021-07-26-24-7
Test performed: AASHTO T315-20
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
Project Identifiers | Project ID: 215465 DEA: 061A8804 EFIS: 0620000178 |
---|---|
DIST-CO-RTE-PM | 06-FRE-145-0.0/6.0 |
Award Date | 03/18/2021 |
Closeout Date | 03/02/2022 |
Work Description | COLD PLANE AC PAVEMENT AND RESURFACE ROADWAY WITH HMA AND RHMA. |
Location Description | FRESNO COUNTY NEAR FIVE POINTS FROM ROUTE 145/5 SEPARATION TO COLUSA AVENUE. |
QA Service Level | 1 (Verified on 02/08/2021) |
Sample Information
Sample Taken Date | 07/26/2021 | Sample Unique Key | 24 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/04/2021 |
Sample type | Department Acceptance | A brief description of the sample | binder |
The quantity of what the sample constitutes | 1 can | From where was the sample collected | Source |
First name of sampler or witnessed by | Garco | Last name of sampler or witnessed by | Garco |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | San Joaquin Refinery | Transportation Laboratory (TL) Number | 056168 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphalt Binder | Performance Grade | PG 70-10 |
---|---|---|---|
Modified | No | Lot number | 2190210719 |
Sublot number | Tank number | 9001 | |
Time of sample | 2:29pm | HMA Supplier | Granite |
Certified Asphalt Supplier | San Joaquin Refinery - Bakersfield CA | Multigrade | No |
Multigrade Type | Asphalt Binder Mix Number | Not set |
Test Details
DIME Sample ID: 2021-07-26-24
DIME Test ID: 2021-07-26-24-7
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-08-10
Test Results
Phase: RTFO residue
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 08/04/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.228 kPa
Phase Angle (δ) (for the 10 cycles): 88.8 degree
Complex Modulus (G*) (for the 10 measurements): 2.276 kPa
Test Temperature (Specimen 1): 70.0 C
Dynamic Shear, G*/sin(δ): 2.28 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications RTFO 2ND
Test was verified on 8/10/2021 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.