Summary for Test 2021-06-11-18-10

Test performed: CTM 202-November 2011

Project Information

Project IdentifiersProject ID: 215636
DEA: 09385804
EFIS: 0920000046
DIST-CO-RTE-PM09-KER-58-R129.4/R135.1,R143.2/R143.9
Award Date05/13/2021
Closeout Date08/31/2021
Work DescriptionCOLD PLANE AC PAVEMENT AND PLACE HMA.
Location DescriptionKERN COUNTY NEAR BORON FROM 0.3 MILE WEST OF EDWARDS AFB OVERCROSSING TO 1.3 MILES WEST OF TWENTY MULE TEAM OVERCROSSING AND FROM 0.7 MILE WEST OF SAN BERNARDINO COUNTY LINE TO SAN BERNARDINO COUNTY LINE
QA Service Level1 (Verified on 06/23/2021)

Sample Information

Sample Taken Date06/11/2021 Sample Unique Key18
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/17/2021
Sample typeVerification A brief description of the sampleJMF 3/4" HMA-A-SP R15, 1.0% LSM
The quantity of what the sample constitutes11 Bags Of Untreated Agg., 3 Bags Coldfeed agg., 2 Bags Rap From where was the sample collectedManufacturer
First name of sampler or witnessed byBlue Diamond Materials Victorville Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0369A-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameBlue Diamond Victorville Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-36-0046,91-36-0106
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sample
The plant number300154 LSM 70 10 A detailed description of where the material sample was collectedBelt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Combined Gradation Report Information

Combined Gradation Report IdBin IndexDime Test Id
No assigned tests for this sample.

Test Details

DIME Sample ID: 2021-06-11-18
DIME Test ID: 2021-06-11-18-10
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2021-07-06

Test Results


What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Satish Jain/Dominic Montemayor
Date of test: 06/30/2021
Cumulative percent passing the 3 in. sieve: 100 %
Cumulative percent passing the 2 1/2 in. sieve: 100 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 99 %
Cumulative percent passing the 1/2 in. sieve: 87 %
Cumulative percent passing the 3/8 in. sieve: 73 %
Cumulative percent passing the #4 sieve: 53 %
Cumulative percent passing the #8 sieve: 40 %
Cumulative percent passing the #16 sieve: 30 %
Cumulative percent passing the #30 sieve: 20 %
Cumulative percent passing the #50 sieve: 13 %
Cumulative percent passing the #100 sieve: 7 %
Cumulative percent passing the #200 sieve: 3.7 %
General comments (publicly viewable) (Max 1000 characters): Combined RAP/Lime Treated Aggregate Gradation W/Correlation Factors Applied

Test was verified on 7/6/2021