Summary for Test 2021-06-10-29-1
Test performed: AASHTO T30-19Project Information
| Project Identifiers | Project ID: 214190 DEA: 024G41U4 EFIS: 0218000047 |
|---|---|
| DIST-CO-RTE-PM | 02-SIS,SIS-5-Var |
| Award Date | 08/26/2019 |
| Closeout Date | 11/24/2021 |
| Work Description | REPLACE REINFORCED CONCRETE BRIDGES & CONSTRUCT RETAINING WALL. |
| Location Description | SHASTA AND SISKIYOU COUNTIES ABOUT 7 MILES NORTH OF POLLARD FLAT FROM 0.8 MILE SOUTH TO 0.7 MILE NORTH OF SIMS ROAD UNDERCROSSING AND FROM 0.6 MILE SOUTH OF CASTLE CRAGS DRIVE UNDERCROSSING TO 0.2 MILE SOUTH OF SOUTH DUNSMUIR UNDERCROSSING |
| QA Service Level | 1 (Verified on 07/09/2019) |
Sample Information
| Sample Taken Date | 06/10/2021 | Sample Unique Key | 29 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/10/2021 |
| Sample type | Acceptance | A brief description of the sample | Combined RAP (3/8-inch) |
| The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Derrick | Last name of sampler or witnessed by | Curry |
| Title of sampler | CGI | Telephone number of sampler | |
| Laboratory sample identification | D78839B | Linked DIME Sample ID | 2021-06-10-28 |
| The fabricator/manufacturer/facility name | J F Shea Construction - Fawndale Rock and Asphalt - Redding, CA | Transportation Laboratory (TL) Number | 779375 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | |
| Structure name |
Material Information
| Material Type | Reclaimed Asphalt Pavement | RAP Source | Fawndale |
|---|---|---|---|
| Aggregate Size | 3/8 Inch | Aggregate Source | Unknown |
| RAP Stockpile | Continuous | Stockpile Size (tons) | Unknown |
| HMA Design ID |
Test Details
DIME Sample ID: 2021-06-10-29
DIME Test ID: 2021-06-10-29-1
Testing Lab: CT D02 - North Region Materials Lab
Test Method: AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Test Release Date: 2021-12-24
Test Results
Does this test use 1/4 sieve?: Yes
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 06/14/2021
Total mass of material in the sample: 1495.9 grams
Mass retained on the 2 in. sieve: 0 grams
Cumulative mass retained on the 1 1/2 in. sieve: 0 grams
Cumulative mass retained on the 1 in. sieve: 0 grams
Cumulative mass retained on the 3/4 in. sieve: 0 grams
Cumulative mass retained on the 1/2 in. sieve: 0 grams
Cumulative mass retained on the 3/8 in. sieve: 9.1 grams
Mass retained on the 1/4 in. sieve: 172.3 grams
Cumulative mass retained on the #4 sieve: 354.5 grams
Cumulative mass retained on the #8 sieve: 689.6 grams
Cumulative mass retained on the #16 sieve: 923 grams
Cumulative mass retained on the #30 sieve: 1077.4 grams
Cumulative mass retained on the #50 sieve: 1188.7 grams
Cumulative mass retained on the #100 sieve: 1268.2 grams
Cumulative mass retained on the #200 sieve: 1320.4 grams
Cumulative percent passing the 2 in. sieve:100 %
Cumulative percent passing the 1 1/2 in. sieve:100 %
Cumulative percent passing the 1 in. sieve:100 %
Cumulative percent passing the 3/4 in. sieve:100 %
Cumulative percent passing the 1/2 in. sieve:100 %
Cumulative percent passing the 3/8 in. sieve:99.4 %
Cumulative percent passing the 1/4 in. sieve:88.5 %
Cumulative percent passing the #4 sieve:76.3 %
Cumulative percent passing the #8 sieve:53.9 %
Cumulative percent passing the #16 sieve:38.3 %
Cumulative percent passing the #30 sieve:28 %
Cumulative percent passing the #50 sieve:20.5 %
Cumulative percent passing the #100 sieve:15.2 %
Cumulative percent passing the #200 sieve:11.73 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/24/2021 ✔