Summary for Test 2021-06-08-11-1
Test performed: AASHTO T59-16Project Information
Project Identifiers | Project ID: 215412 DEA: 061A9404 EFIS: 0620000141 |
---|---|
DIST-CO-RTE-PM | 06-FRE-5-20.0/21.0,30.9/37.3 |
Award Date | 02/18/2021 |
Closeout Date | 11/23/2021 |
Work Description | COLD PLANE AND REPLACE WITH RHMA (TYPE O). |
Location Description | FRESNO COUNTY FROM 2 MILES NORTH OF ROUTE 5/33/145 SEPARATION TO SOUTH DERRIC AVENUE OVERCROSSING AND FROM 1 MILE NORTH OF ROUTE 5/33 SEPARATION TO 1.1 MILES SOUTH OF KAMM AVENUE OVERCROSSING |
QA Service Level | 1 (Verified on 01/25/2021) |
Sample Information
Sample Taken Date | 06/08/2021 | Sample Unique Key | 11 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/11/2021 |
Sample type | Department Acceptance | A brief description of the sample | BWC Emulsion |
The quantity of what the sample constitutes | 1 jug | From where was the sample collected | Distributor |
First name of sampler or witnessed by | Ahmad | Last name of sampler or witnessed by | Dakwar |
Title of sampler | TE | Telephone number of sampler | |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Talley Oil - Madera | Transportation Laboratory (TL) Number | c813544 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphaltic Emulsion | Emulsion Grade | Bonded Wearing Course |
---|---|---|---|
Lot Number | Not set | Sub Lot | Not set |
Test Details
DIME Sample ID: 2021-06-08-11
DIME Test ID: 2021-06-08-11-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T59-16: Standard Method of Test for Emulsified Asphalts (Emulsified Asphalt Residue Evap. (Sec. 7))
Test Release Date: 2021-06-16
Test Results
How many beakers will be used to conduct the test?: 4
Input Type: Measured
Tester's full name: Minoo Ahmadi
Date of test: 06/16/2021
Beaker 1 Mass of beaker, rod, screen (if used), and residue: 452.4 g
Beaker 1 Tare mass of the beaker, rod, and screen (if used): 419.2 g
Beaker 2 Mass of beaker, rod, screen (if used), and residue: 458.3 g
Beaker 2 Tare mass of the beaker, rod, and screen (if used): 425.1 g
Beaker 3 Mass of beaker, rod, screen (if used), and residue: 449.8 g
Beaker 3 Tare mass of the beaker, rod, and screen (if used): 416.6 g
Beaker 4 Mass of beaker, rod, screen (if used), and residue: 451.2 g
Beaker 4 Tare mass of the beaker, rod, and screen (if used): 418.0 g
Beaker 1 Residue: 66.4 %
Beaker 2 Residue: 66.4 %
Beaker 3 Residue: 66.4 %
Beaker 4 Residue: 66.4 %
Percentage of residue: 66.0 %
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications
Test was verified on 6/16/2021 ✔