DIME - Test Summary

Summary for Test 2021-05-21-22-1

Test performed: AASHTO T27-14

Project Identifiers	Project ID: 214228 DEA: 120N4904 EFIS: 1214000050
DIST-CO-RTE-PM	12-ORA-91-R12.5/R13.9
Award Date	11/29/2022
Closeout Date	11/07/2023
Work Description	VEHICLE ENFORCEMENT FACILITY IMPROVEMENT AT PERALTA WEIGH STATION.
Location Description	ORANGE COUNTY IN ANAHEIM FROM 1.0 MILE EAST OF ROUTE 91/90 SEPARATION TO 0.5 MILE WEST OF WEIR CANYON ROAD UNDERCROSSING
QA Service Level	1 (Verified on 08/13/2019)

Sample Taken Date	05/21/2021	Sample Unique Key	22
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/03/2021
Sample type	Verification	A brief description of the sample	PSUE 3/4" RWMA-G-SP 0.40% Evotherm
The quantity of what the sample constitutes	3 Bags Of Combined Aggregate	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	All American Asphalt	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0330G-21	Linked DIME Sample ID
The fabricator/manufacturer/facility name	All American Asphalt Corona	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0005
The fabricator's/manufacturer's product name for the sample	3/4 RWMA-G-SP	The fabricator/manufacturer designation for the sample
The plant number	108835	A detailed description of where the material sample was collected	Belt Cut at All American Corona Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-05-21-22

DIME Test ID: 2021-05-21-22-1

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)

Test Release Date: 2021-06-09

What type of gradation is being tested?: Combined Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

Does this test use 1/4 sieve? (question for HMA Gradation Type): No

Has the fine aggregate sample been reduced?: No

Input Type: Calculated

Tester's full name: Satish Jain/Edmond Jabbour

Date of test: 06/04/2021

Cumulative percent passing the 2 in. sieve: 100 %

Cumulative percent passing the 1 1/2 in. sieve: 100 %

Cumulative percent passing the 1 in. sieve: 100 %

Cumulative percent passing the 3/4 in. sieve: 96 %

Cumulative percent passing the 1/2 in. sieve: 82 %

Cumulative percent passing the 3/8 in. sieve: 66 %

Cumulative percent passing the #4 sieve: 30 %

Cumulative percent passing the #8 sieve: 17 %

Cumulative percent passing the #16 sieve: 12 %

Cumulative percent passing the #30 sieve: 8 %

Cumulative percent passing the #50 sieve: 5 %

Cumulative percent passing the #100 sieve: 3 %

Cumulative percent passing the #200 sieve: 2.1 %

General comments (publicly viewable) (Max 1000 characters): Combined Virgin Aggregate Gradation

Test was verified on 6/9/2021 ✔