Summary for Test 2021-05-08-4-2
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 215359 DEA: 081K1904 EFIS: 0818000207 |
---|---|
DIST-CO-RTE-PM | 08-SBD-15-16.1/169.4 |
Award Date | 02/05/2021 |
Closeout Date | 07/27/2022 |
Work Description | REMOVE, PREPARE AND FURNISH POLYESTER CONC OVERLAY & BRIDGE DECK. |
Location Description | SAN BERNARDINO COUNTY IN AND NEAR HESPERIA AT VARIOUS LOCATIONS FROM CAJON CREEK TO MICRO DITCH. |
QA Service Level | 1 (Verified on 03/30/2021) |
Sample Information
Sample Taken Date | 05/08/2021 | Sample Unique Key | 4 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/25/2021 |
Sample type | Department Acceptance | A brief description of the sample | Aggregate filler for Rapid set |
The quantity of what the sample constitutes | 1 bag | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Jegbefume | Last name of sampler or witnessed by | Adodo |
Title of sampler | ASR | Telephone number of sampler | |
Laboratory sample identification | 21-PCC-0100 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | not provided | Transportation Laboratory (TL) Number | C |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | na |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Original Manufacturer Packaging | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-05-08-4
DIME Test ID: 2021-05-08-4-2
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2021-06-01
Test Results
What size aggregate is being tested?: 0.375 in x No. 8 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Individual Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Ryan Kester
Date of test: 05/26/2021
Individual Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
1122 grams | ||||||
0.0 grams | 100 % | |||||
145.2 grams | 87 % | |||||
615.4 grams | 32 % | |||||
208.2 grams | 14 % | |||||
152.9 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/1/2021 ✔