Summary for Test 2021-04-21-19-2

Test performed: AASHTO T315-16

Project Information

Project IdentifiersProject ID: 215307
DEA: 033F5004
EFIS: 0313000019
DIST-CO-RTE-PM03-GLE-5-R7.4/R17.0
Award Date01/04/2021
Closeout Date11/30/2021
Work DescriptionPLACE HMA (TYPE A) AND MODIFY INTERCONNECTION CONDUIT AND CABLE.
Location DescriptionGLENN COUNTY IN AND NEAR WILLOWS AT VARIOUS LOCATIONS FROM COUNTY ROAD 57 OVERCROSSING TO COUNTY ROAD 33 OVERCROSSING
QA Service Level1 (Verified on 12/02/2020)

Sample Information

Sample Taken Date04/21/2021 Sample Unique Key19
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/29/2021
Sample typeAcceptance A brief description of the samplePG 64-16
The quantity of what the sample constitutesone out of one From where was the sample collectedManufacturer
First name of sampler or witnessed byBrad (WITNESS) Last name of sampler or witnessed byMcKeehan
Title of samplerTET Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameKnife River Construction - Orland Drum Plant Transportation Laboratory (TL) NumberC724331
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-16
ModifiedNo Lot number1
Sublot number3 Tank number
Time of sample HMA SupplierKRC Orland
Certified Asphalt SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade TypeNot set Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2021-04-21-19
DIME Test ID: 2021-04-21-19-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-05-05

Test Results


Phase: Original binder
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 05/03/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.180 kPa
Phase Angle (δ) (for the 10 cycles): 85.7 degree
Complex Modulus (G*) (for the 10 measurements): 1.497 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.50 kPa
General comments (publicly viewable) (Max 1000 characters): Original

Test was verified on 5/5/2021