Summary for Test 2021-03-19-3-4
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 215150 DEA: 120P0304 EFIS: 1215000024 |
---|---|
DIST-CO-RTE-PM | 12-ORA-74-11.5/16.6 |
Award Date | 11/13/2020 |
Closeout Date | Not set |
Work Description | PLACE HIGH FRICTION SURFACE TREATMENT, HMA & MIDWEST GUARDRAIL SYSTEM. |
Location Description | ORANGE COUNTY NEAR SAN JUAN CAPISTRANO FROM 1.0 MILE WEST OF SAN JUAN HOT SPRINGS ROAD TO ORANGE COUNTY LINE |
QA Service Level | 1 (Verified on 12/10/2020) |
Sample Information
Sample Taken Date | 03/19/2021 | Sample Unique Key | 3 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/22/2021 |
Sample type | Verification | A brief description of the sample | JMF 3/4" WMA-A-SP R25, 0.25% Evotherm |
The quantity of what the sample constitutes | 3 Bags of Coldfeed Aggregate , 1 Bag of RAP | From where was the sample collected | Distributor |
First name of sampler or witnessed by | RJ Noble Orange | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0167A-21 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | RJ Noble Orange | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0014, 91-33-0039 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 3/4 WMA-A-SP R25 | The fabricator/manufacturer designation for the sample | |
The plant number | 36R2508SPWEC | A detailed description of where the material sample was collected | Belt Cut at RJ Noble Orange Plant |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-03-19-3
DIME Test ID: 2021-03-19-3-4
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-04-09
Test Results
Input Type: Measured
Tester's full name: Sebastian Ferrer
Date of test: 03/30/2021
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 963.6 grams
Mass of the pycnometer with water (B): 653.1 grams
Mass of the oven dried sample (before pycnometer) (A): 489.6 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 489.6 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.584
Bulk specific gravity (SSD Basis): 2.639
Apparent specific gravity: 2.734
Absorption: 2.1 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/9/2021 ✔