Summary for Test 2021-03-04-17-7

Test performed: AASHTO T315-16

Project Information

Project IdentifiersProject ID: 213700
DEA: 020H9004
EFIS: 0215000077
DIST-CO-RTE-PM02-BUT-70-41.9/42.3
Award Date05/07/2020
Closeout Date11/01/2021
Work DescriptionREMOVE CULVERTS AND CONSTRUCT BRIDGE
Location DescriptionBUTTE COUNTY NEAR PULGA FROM 2.5 MILES WEST OF PENSTOCK UNDERCROSSING TO 2.1 MILES WEST OF PENSTOCK UNDERCROSSING
QA Service Level1 (Verified on 01/03/2019)

Sample Information

Sample Taken Date03/04/2021 Sample Unique Key17
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/22/2021
Sample typeAcceptance A brief description of the sampleAsphalt Binder Modified
The quantity of what the sample constitutes2 of 2 cans From where was the sample collectedJob Site
First name of sampler or witnessed byMonte Last name of sampler or witnessed bySpencer
Title of samplerTET Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameMarathan Transportation Laboratory (TL) Number896989
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-28 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA Supplier
Asphalt Binder SupplierMarathon Petroleum Co. LP - Bakersfield CA MultigradeNot set
Multigrade TypeNot set HMA Design ID

Test Details

DIME Sample ID: 2021-03-04-17
DIME Test ID: 2021-03-04-17-7
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-03-26

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 03/24/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.208 kPa
Phase Angle (δ) (for the 10 cycles): 66.1 degree
Complex Modulus (G*) (for the 10 measurements): 2.084 kPa
Test Temperature (Specimen 1): 70.0 C
Dynamic Shear, G*/sin(δ): 2.28 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 Std Specs RTFO +6

Test was verified on 3/26/2021