Summary for Test 2020-07-22-57-3
Test performed: AASHTO T209-12Project Information
| Project Identifiers | Project ID: 214802 DEA: 031G7004 EFIS: 0319000135 |
|---|---|
| DIST-CO-RTE-PM | 03-SUT-99-28.0/30.6 |
| Award Date | 05/18/2020 |
| Closeout Date | 03/16/2021 |
| Work Description | COLD PLANE AC PAVEMENT, RHMA OVERLAY, & INDUCTIVE LOOP DETECTORS. |
| Location Description | SUTTER COUNTY IN AND NEAR YUBA CITY FROM 0.1 MILE NORTH OF SMITH ROAD TO ROUTE 20 |
| QA Service Level | 1 (Verified on 03/24/2020) |
Sample Information
| Sample Taken Date | 07/22/2020 | Sample Unique Key | 57 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/22/2020 |
| Sample type | Verification | A brief description of the sample | 3/4" RHMA-G |
| The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | DSG Personnel | Last name of sampler or witnessed by | DSG Personnel |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | JMF20-030 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | DeSilva Gates Aggregates-Marysville | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-07-22-57
DIME Test ID: 2020-07-22-57-3
Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2021-02-09
Test Results
Number of tests: 2
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Kavon Rastegar
Date of test: 07/22/2020
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water: 7346.6 grams
Mass of oven-dry sample in air for Sample 1: 2146.6 grams
Mass of container filled with the sample and water for Sample 1: 8631.2 grams
Mass of container filled with water: 7346.9
Mass of oven-dry sample in air for Sample 2: 2124.0 grams
Mass of container filled with the sample and water for Sample 2: 8617.8 grams
Temperature of Water: 76 °F
Specific Gravity for Sample 1: 2.490
Specific Gravity for Sample 2: 2.490
Average Specific Gravity: 2.490
Theoretical maximum density at 25°C (77°F): no data
General comments (publicly viewable) (Max 1000 characters): JMF20-030. Report only.
Test was verified on 2/9/2021 ✔