DIME - Test Summary

Summary for Test 2020-10-28-13-5

Test performed: AASHTO T104-99r16

Project Identifiers	Project ID: 213568 DEA: 034H6904 EFIS: 0319000026
DIST-CO-RTE-PM	03-SAC,SAC/SOL-12-0-0.4/26.3-26.4, 0.0-0.4/26.3-26.4
Award Date	08/13/2018
Closeout Date	08/28/2023
Work Description	Major Damage Restoration (Emergency Opening)
Location Description	Not set
QA Service Level	1 (Verified on 08/24/2018)

Sample Taken Date	10/28/2020	Sample Unique Key	13
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	10/29/2020
Sample type	Quality Assurance	A brief description of the sample	Hydrolite-Trinity Lightweight
The quantity of what the sample constitutes	3-5 gallon bucket	From where was the sample collected	Job Site
First name of sampler or witnessed by	not available	Last name of sampler or witnessed by	not available
Title of sampler		Telephone number of sampler
Laboratory sample identification	20-PCCC-0217	Linked DIME Sample ID
The fabricator/manufacturer/facility name	na	Transportation Laboratory (TL) Number	na
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	na
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	at job site
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/8 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2020-10-28-13

DIME Test ID: 2020-10-28-13-5

Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory

Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)

Test Release Date: 2020-12-07

Percentage of the total sample represented by each size

Size of aggregate being tested: Fine Aggregate

What type of solution was used?: Sodium sulfate

What was the condition of the solution?: Previously used

Number of immersion cycles performed: 5

Input Type: Calculated

Tester's full name: RK/JH

Date of test: 11/17/2020

Percentage of ⅜ inch x No. 4 material loss: 0 %

Percentage of No. 4 x 8 material loss: 4 %

Percentage of No. 8 x 16 material loss: 0 %

Percentage of No. 16 x 30 material loss: 0 %

Percentage of No. 30 x 50 material loss: 0 %

Fine weighted average loss: 0.8 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 12/7/2020 ✔