Summary for Test 2020-11-02-8-2
Test performed: AASHTO T59-16Project Information
| Project Identifiers | Project ID: 214449 DEA: 030H3414 EFIS: 0317000152 |
|---|---|
| DIST-CO-RTE-PM | 03-ED-50-R28.5/R29.1,R31.2 |
| Award Date | 12/09/2019 |
| Closeout Date | 07/06/2021 |
| Work Description | REPLACE BRIDGE, RESTORE CULVERTS, AND ADD HIGHWAY PLANTING. |
| Location Description | EL DORADO COUNTY NEAR POLLOCK PINES FROM 0.3 MILE WEST TO 0.3 MILE EAST OF RIDGEWAY DRIVE UNDERCROSSING AND AT 0.1 MILE WEST OF SLY PARK ROAD UNDERCROSSING |
| QA Service Level | 1 (Verified on 10/23/2019) |
Sample Information
| Sample Taken Date | 11/02/2020 | Sample Unique Key | 8 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/04/2020 |
| Sample type | Acceptance | A brief description of the sample | Asphaltic emulsion 1 gallon |
| The quantity of what the sample constitutes | 1 gallon of emulsion | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | shane | Last name of sampler or witnessed by | Prettyman |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Redding - VSS | Transportation Laboratory (TL) Number | 790468 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Asphaltic Emulsion | Emulsion Grade | SS-1h |
|---|---|---|---|
| Lot Number | Not set | Sub Lot | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-11-02-8
DIME Test ID: 2020-11-02-8-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T59-16: Standard Method of Test for Emulsified Asphalts (Emulsified Asphalt Residue Evap. (Sec. 7))
Test Release Date: 2020-11-06
Test Results
How many beakers will be used to conduct the test?: 4
Input Type: Measured
Tester's full name: Juan Gomez
Date of test: 11/05/2020
Beaker 1 Mass of beaker, rod, screen (if used), and residue: 437.4 g
Beaker 1 Tare mass of the beaker, rod, and screen (if used): 418.8 g
Beaker 2 Mass of beaker, rod, screen (if used), and residue: 435.3 g
Beaker 2 Tare mass of the beaker, rod, and screen (if used): 416.6 g
Beaker 3 Mass of beaker, rod, screen (if used), and residue: 430.5 g
Beaker 3 Tare mass of the beaker, rod, and screen (if used): 412.0 g
Beaker 4 Mass of beaker, rod, screen (if used), and residue: 430.1 g
Beaker 4 Tare mass of the beaker, rod, and screen (if used): 411.4 g
Beaker 1 Residue: 37.2 %
Beaker 2 Residue: 37.4 %
Beaker 3 Residue: 37.0 %
Beaker 4 Residue: 37.4 %
Percentage of residue: 37.3 %
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications
Test was verified on 11/6/2020 ✔