Summary for Test 2020-09-08-7-4
Test performed: ASTM D638-Dec14Project Information
| Project Identifiers | Project ID: 214625 DEA: 120R5404 EFIS: 1218000113 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-5-1.6/33.1 |
| Award Date | 02/27/2020 |
| Closeout Date | 07/29/2021 |
| Work Description | Methacrylate deck seal treatment and polyester concrete overlay |
| Location Description | FOR CONSTRUCTION ON STATE HIGHWAY IN ORANGE COUNTY AT VARIOUS LOCATIONS FROM EL CAMINO REAL UNDERCROSSING TO MAIN STREET OVERCROSSING |
| QA Service Level | 1 (Verified on 06/16/2020) |
Sample Information
| Sample Taken Date | 09/08/2020 | Sample Unique Key | 7 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/08/2020 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can |
| The quantity of what the sample constitutes | 2 Tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | Daniel | Last name of sampler or witnessed by | Tikusis |
| Title of sampler | Technical Director | Telephone number of sampler | 7073309227 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Kwik Bond Polymers and Reichhold | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | 1276282 |
|---|---|---|---|
| Batch number | 1276282 | Mix number | 1276282 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-09-08-7
DIME Test ID: 2020-09-08-7-4
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Test Release Date: 2020-10-19
Test Results
Number of specimens tested: 6
Input Type: Measured
Tester's full name: Larry McCrum
Date of test: 10/19/2020
Conditioning procedure: 18/25/50+5/70
Speed of testing: 0.45 in/min
Sample 1 Width: 0.482 in
Sample 1 Thickness: 0.26 in
Sample 1 Area: 0.1253 in^2
Sample 1 Ultimate Strength Actual: 405.4 lbs
Sample 1 percent elongation: 51.7 %
Sample 1 Time: 3 MM:SS
Sample 2 Width: 0.482 in
Sample 2 Thickness: 0.263 in
Sample 2 Area: 0.1268 in^2
Sample 2 Ultimate Strength Actual: 390.8 lbs
Sample 2 percent elongation: 49.5 %
Sample 2 Time: 3 MM:SS
Sample 3 Width: 0.482 in
Sample 3 Thickness: 0.256 in
Sample 3 Area: 0.1234 in^2
Sample 3 Ultimate Strength Actual: 424.3 lbs
Sample 3 percent elongation: 40 %
Sample 3 Time: 2 MM:SS
Sample 4 Width: 0.483 in
Sample 4 Thickness: 0.26 in
Sample 4 Area: 0.1256 in^2
Sample 4 Ultimate Strength Actual: 384.1 lbs
Sample 4 percent elongation: 50.8 %
Sample 4 Time: 3 MM:SS
Sample 5 Width: 0.481 in
Sample 5 Thickness: 0.262 in
Sample 5 Area: 0.126 in^2
Sample 5 Ultimate Strength Actual: 385.21 lbs
Sample 5 percent elongation: 43.5 %
Sample 5 Time: 3 MM:SS
Sample 6 Width: 0.482 in
Sample 6 Thickness: 0.253 in
Sample 6 Area: 0.1219 in^2
Sample 6 Ultimate Strength Actual: 409.9 lbs
Sample 6 percent elongation: 40.1 %
Sample 6 Time: 2 MM:SS
Sample 1 Ultimate strength: 3235.4 psi
Sample 2 Ultimate strength : 3082 psi
Sample 3 Ultimate strength: 3438.4 psi
Sample 4 Ultimate strength: 3058.1 psi
Sample 5 Ultimate strength: 3057.2 psi
Sample 6 Ultimate strength : 3362.6 psi
Ultimate Strength Average: 3206 psi
Percent Elongation Average: 46 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/19/2020 ✔