Summary for Test 2020-09-24-12-4
Test performed: ASTM D412-06a-re13Project Information
Project Identifiers | Project ID: 214784 DEA: 023H8104 EFIS: 0218000036 |
---|---|
DIST-CO-RTE-PM | 02-LAS,PLU-36,70,89,395-VAR |
Award Date | 05/06/2020 |
Closeout Date | 08/04/2022 |
Work Description | PAINT BRIDGE STEEL, SEAL AND OVERLAY DECKS AND REPLACE BEARINGS. |
Location Description | LASSEN AND PLUMAS COUNTIES AT VARIOUS LOCATIONS |
QA Service Level | 1 (Verified on 03/20/2020) |
Sample Information
Sample Taken Date | 09/24/2020 | Sample Unique Key | 12 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/28/2020 |
Sample type | Quality Assurance | A brief description of the sample | Bearing Pad |
The quantity of what the sample constitutes | 17 | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Ismail | Last name of sampler or witnessed by | Ibrahim |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Scougal Rubber | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | 19002-1 |
---|---|---|---|
Material/Compound/Elastomer ID | NA | Samples Representing | 1 |
Description (size) | 2.3" x 8" x 8" | Comments | |
Description (Number of Shims) | 4 | Type of Bearing Pad | Steel |
Description (Thickness of Shims) | 14 gage | Manufacturer(s) | Scougal Rubber |
Batch Number | NA |
Test Details
DIME Sample ID: 2020-09-24-12
DIME Test ID: 2020-09-24-12-4
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Test Release Date: 2020-10-01
Test Results
Number of specimens tested: 5
Unit of the Ultimate Tensile Values: lbf per sqr in
Input Type: Calculated
Tester's full name: bewing
Date of test: 09/30/2020
UTM: 2kip
Humidity: 50.00 %
Temperature: 72 F
Sample 1 Median Thickness: 0.08
Sample 1 Thickness all Within 0.003 inch?: Yes
Sample 1 Ultimate Tensile: 2303.01 lbf/in^2
Sample 1 Elongation (350% Min): Pass
Sample 2 Median Thickness: 0.08
Sample 2 Thickness all Within 0.003 inch?: Yes
Sample 2 Ultimate Tensile: 1873.1 lbf/in^2
Sample 2 Elongation (350% Min): Pass
Sample 3 Median Thickness: 0.079
Sample 3 Thickness all Within 0.003 inch?: Yes
Sample 3 Ultimate Tensile: 2262.28 lbf/in^2
Sample 3 Elongation (350% Min): Pass
Sample 4 Median Thickness: 0.078
Sample 4 Thickness all Within 0.003 inch?: Yes
Sample 4 Ultimate Tensile: 2334.44 lbf/in^2
Sample 4 Elongation (350% Min): Pass
Sample 5 Median Thickness: 0.081
Sample 5 Thickness all Within 0.003 inch?: Yes
Sample 5 Ultimate Tensile: 1951.21 lbf/in^2
Sample 5 Elongation (350% Min): Pass
Median of the Ultimate Tensile Values: 2262.3 lbf/in^2
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Bluehill Data Point FileTest graph for Sample 2
Source: Bluehill Data Point File
Test graph for Sample 3
Source: Bluehill Data Point File
Test graph for Sample 5
Source: Bluehill Data Point File
Test graph for Sample 1
Source: Bluehill Data Point File
Test graph for Sample 4
Test was verified on 10/1/2020 ✔