Summary for Test 2020-08-22-5-4

Test performed: AASHTO T315-16

Project Information

Project IdentifiersProject ID: 214882
DEA: 022H9904
EFIS: 0217000045
DIST-CO-RTE-PM02-SHA-44-51.6/52.2
Award Date05/27/2020
Closeout Date09/23/2020
Work DescriptionROADWAY EXCAVATION, AGGREGATE BASE & HOT MIX ASPHALT.
Location DescriptionSHASTA COUNTY NEAR VIOLA FROM 0.4 MILE EAST TO 1.1 MILES EAST OF BRIDGE CREEK ROAD
QA Service Level1 (Verified on 05/26/2020)

Sample Information

Sample Taken Date08/22/2020 Sample Unique Key5
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/28/2020
Sample typeAcceptance A brief description of the sampleAB PG 58-34M
The quantity of what the sample constitutes1 Can #1 TEST, #2(851365) No Test From where was the sample collectedJob Site
First name of sampler or witnessed byD Last name of sampler or witnessed byHarper
Title of samplerConsultant Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameJF Shea Fawndale Transportation Laboratory (TL) Number851364
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedYes Lot number
Sublot number Tank numberNot set
Time of sampleNot set HMA SupplierNot set
Certified Asphalt SupplierNot set MultigradeNot set
Multigrade TypeNot set Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2020-08-22-5
DIME Test ID: 2020-08-22-5-4
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2020-09-21

Test Results


Phase: RTFO residue
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 09/17/2020
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.557 kPa
Phase Angle (δ) (for the 10 cycles): 58.1 degree
Complex Modulus (G*) (for the 10 measurements): 5.575 kPa
Test Temperature (Specimen 1): 58.0 C
Dynamic Shear, G*/sin(δ): 6.57 kPa
General comments (publicly viewable) (Max 1000 characters): 64 deg 3.237 phase angle = 59.4

Test was verified on 9/21/2020