Summary for Test 2014-12-15-5-1
Test performed: CTM 214-August 2010Project Information
Project Identifiers | Project ID: 209186 DEA: 04153304 EFIS: 0400020304 |
---|---|
DIST-CO-RTE-PM | 04-SCL-101-0.0/26.7 |
Award Date | 04/02/2014 |
Closeout Date | 08/22/2018 |
Work Description | INSTALL TOS, RAMP METERING AND RAMP WIDENING. |
Location Description | SANTA CLARA COUNTY AT VARIOUS LOCATIONS FROM SAN BENITO COUNTY LINE TO ROUTE 85/101 INTERCHANGE |
QA Service Level | 1 (Verified on 04/11/2014) |
Sample Information
Sample Taken Date | 12/15/2014 | Sample Unique Key | 5 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/07/2015 |
Sample type | Annual Source Testing | A brief description of the sample | PCC Aggregates |
The quantity of what the sample constitutes | 1 | From where was the sample collected | Source |
First name of sampler or witnessed by | Cesar | Last name of sampler or witnessed by | william |
Title of sampler | Consultant | Telephone number of sampler | Unknown |
Laboratory sample identification | AG150029 7950-31C | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Cemex Pleasanton | Transportation Laboratory (TL) Number | C385666 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-01-0009 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | PCC | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Stockpile |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | |
The concrete mix design number | Lot number | Not set | |
Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2014-12-15-5
DIME Test ID: 2014-12-15-5-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate
Test Release Date: 2015-02-06
Test Results
What size aggregate is being tested?: Coarse Aggregate
Input Type: Calculated
Tester's full name: Ed Perez
Date of test: 02/03/2015
Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data
Percentage Loss of material retained on 1 ½ x 1 in. sieve: no data
Percentage Loss of material retained on 1 x ¾ in. sieve: no data
Percentage Loss of material retained on ¾ x ½ in. sieve: no data
Percentage Loss of material retained on ½ x ⅜ in. sieve: no data
Percentage Loss of material retained on ⅜ in. x #4 sieve: no data
Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data
Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data
Percentage Loss of material retained on 3/4 in. through #4 sieve: no data
Weighted Average Percent Loss of Coarse Aggregate: 6.0 %
Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum): no data
Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum): no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 2/6/2015 ✔