Summary for Test 2020-06-10-40-6
Test performed: AASHTO T283-14Project Information
| Project Identifiers | Project ID: 212866 DEA: 021H9704 EFIS: 0216000051 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-36-12.6/13.1 |
| Award Date | 11/25/2019 |
| Closeout Date | 10/06/2020 |
| Work Description | CURVE REALIGNMENT AND HMA PAVING. |
| Location Description | TEHAMA COUNTY ABOUT 16 MILES EAST OF PLATINA FROM 2.3 MILES EAST TO 2.8 MILES EAST OF DRY CREEK BRIDGE |
| QA Service Level | 1 (Verified on 01/08/2019) |
Sample Information
| Sample Taken Date | 06/10/2020 | Sample Unique Key | 40 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/10/2020 |
| Sample type | Verification | A brief description of the sample | 3/4-inch Type A HMA (eq. PG 64-28 M) 22.0 RAP, 1.2 Lime |
| The quantity of what the sample constitutes | JMF Renewal and PSE | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Dave | Last name of sampler or witnessed by | Lockett |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D78461 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Northstate Asphalt, Redding, CA | Transportation Laboratory (TL) Number | 736618 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | |
| Sublot number | HMA Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-06-10-40
DIME Test ID: 2020-06-10-40-6
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Test Release Date: 2020-08-31
Test Results
Unit system used?: SI Units
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 06/15/2020
| Wet 1 | Wet 2 | Wet 3 | Dry 1 | Dry 2 | Dry 3 | |
|---|---|---|---|---|---|---|
| Treated | ||||||
| 150.0 mm | 150.0 mm | 150.0 mm | 150.0 mm | 150.0 mm | 150.0 mm | |
| 94.9 mm | 94.7 mm | 94.8 mm | 94.9 mm | 94.8 mm | 94.7 mm | |
| 3742.4 g | 3741.1 g | 3741.2 g | 3741.6 g | 3739.5 g | 3738.9 g | |
| 2176.1 g | 2176.2 g | 2173.2 g | 2179.9 g | 2176.5 g | 2173.6 g | |
| 3783.9 g | 3783.2 g | 3784.0 g | 3788.6 g | 3778.7 g | 3785.2 g | |
| 2.508 | 2.508 | 2.508 | 2.508 | 2.508 | 2.508 | |
| 3825.2 g | 3825.2 g | 3824.6 g | ||||
| 2217.4 g | 2217.1 g | 2211.8 g | ||||
| 94.9 mm | 94.9 mm | 94.8 mm | ||||
| 215 mmHg | 238 mmHg | 260 mmHg | ||||
| 20 inHg | 20 inHg | 19 inHg | ||||
| 5 minutes | 5 minutes | 5 minutes | ||||
1607.8 cm^3 | 1607.0 cm^3 | 1610.8 cm^3 | 1608.7 cm^3 | 1602.2 cm^3 | 1611.6 cm^3 | |
2.328 | 2.328 | 2.323 | 2.326 | 2.334 | 2.320 | |
7.2 % | 7.2 % | 7.4 % | 7.3 % | 6.9 % | 7.5 % | |
115.8 cm^3 | 115.7 cm^3 | 119.2 cm^3 | 117.4 cm^3 | 110.6 cm^3 | 120.9 cm^3 | |
3823.5 g | 3822.1 g | 3824.6 g | ||||
3835 g | 3833.7 g | 3836.6 g | ||||
1607.8 cm^3 | 1608.1 cm^3 | 1612.8 cm^3 | ||||
82.8 cm^3 | 84.1 cm^3 | 83.4 cm^3 | ||||
72 % | 73 % | 70 % | ||||
0 % | 0.1 % | 0.1 % | ||||
19323 N | 19474 N | 21859 N | 19376 N | 20996 N | 23522 N | |
0 | 0 | 0 | 0 | 0 | 0 | |
28 | 29 | 29 | 23 | 25 | 26 | |
0 | 0 | 0 | 0 | 0 | 0 | |
864 kPa | 871 kPa | 979 kPa | 867 kPa | 940 kPa | 1054 kPa | |
131 psi | 138 psi | |||||
0.95 | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/31/2020 ✔