Summary for Test 2020-08-12-20-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 214802 DEA: 031G7004 EFIS: 0319000135 |
---|---|
DIST-CO-RTE-PM | 03-SUT-99-28.0/30.6 |
Award Date | 05/18/2020 |
Closeout Date | 03/16/2021 |
Work Description | COLD PLANE AC PAVEMENT, RHMA OVERLAY, & INDUCTIVE LOOP DETECTORS. |
Location Description | SUTTER COUNTY IN AND NEAR YUBA CITY FROM 0.1 MILE NORTH OF SMITH ROAD TO ROUTE 20 |
QA Service Level | 1 (Verified on 03/24/2020) |
Sample Information
Sample Taken Date | 08/12/2020 | Sample Unique Key | 20 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/20/2020 |
Sample type | Acceptance | A brief description of the sample | 1/2" cold feed RHMA-O |
The quantity of what the sample constitutes | 1 bag | From where was the sample collected | Source |
First name of sampler or witnessed by | John | Last name of sampler or witnessed by | Bamfield |
Title of sampler | TE | Telephone number of sampler | |
Laboratory sample identification | 20-HMA-0164 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Desilva Gates-Marysville | Transportation Laboratory (TL) Number | C801766 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | not provided |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Auto Sampler at sources | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | 1 | |
Sublot number | 6 | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-08-12-20
DIME Test ID: 2020-08-12-20-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-08-26
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Ryan Kester
Date of test: 08/26/2020
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
2772.7 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
115.5 grams | 95.8 % | |||||
496.7 grams | 82.1 % | |||||
1907.0 grams | 31.2 % | |||||
233.4 grams | 16.6 % | |||||
334.9 grams | 10.3 % | |||||
386.6 grams | 7.1 % | |||||
418.3 grams | 5.1 % | |||||
438.1 grams | 3.9 % | |||||
451.6 grams | 3.04 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/26/2020 ✔