Summary for Test 2020-06-04-28-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 214571 DEA: 020J1104 EFIS: 0219000062 |
---|---|
DIST-CO-RTE-PM | 02-PLU-70-33.1/42.1 |
Award Date | 02/07/2020 |
Closeout Date | 04/27/2021 |
Work Description | PLACE HMA & SHOULDER BACKING, & REMOVE & REPLACE PAVEMENT DELINEATION. |
Location Description | PLUMAS COUNTY AT AND NEAR KEDDIE FROM INDIAN CREEK BRIDGE TO 0.3 MILE WEST OF SPANISH CREEK BRIDGE NO. 09-0018 |
QA Service Level | 1 (Verified on 01/22/2020) |
Sample Information
Sample Taken Date | 06/04/2020 | Sample Unique Key | 28 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/05/2020 |
Sample type | Verification | A brief description of the sample | 1/2″ Sized Untreated Virgin Aggregate |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Source |
First name of sampler or witnessed by | PEI | Last name of sampler or witnessed by | PEI |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D78458B | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Sierra Cascade Aggregate and Asphalt Products | Transportation Laboratory (TL) Number | 733199 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-32-0002 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Sized Untreated Aggregate Stockpile | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | JMF 20-07-S1 | Lot number | |
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-06-04-28
DIME Test ID: 2020-06-04-28-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-08-14
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Karen Spliethof
Date of test: 06/06/2020
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
3069.5 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
1070.0 grams | 65.1 % | |||||
2343.0 grams | 23.7 % | |||||
2718 grams | 11.5 % | |||||
2831.0 grams | 7.8 % | |||||
90.5 grams | 4.8 % | |||||
129.0 grams | 3.6 % | |||||
148.2 grams | 3 % | |||||
159.9 grams | 2.6 % | |||||
170.4 grams | 2.2 % | |||||
182.1 grams | 1.84 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/14/2020 ✔