Summary for Test 2020-08-04-4-2

Test performed: AASHTO T84-14

Project Information

Project IdentifiersProject ID: 214059
DEA: 042K7504
EFIS: 0417000019
DIST-CO-RTE-PM04-SCL-152-7.6/M10.2
Award Date05/24/2019
Closeout Date04/12/2021
Work DescriptionROADWAY REHAB, CURB RAMPS, SIGNALS, AND STRIPING UPGRADES.
Location DescriptionSANTA CLARA COUNTY IN GILROY FROM 0.3 MILE WEST OF SANTA TERESA BOULEVARD TO ROUTE 101
QA Service Level1 (Verified on 06/04/2019)

Sample Information

Sample Taken Date08/04/2020 Sample Unique Key4
Will the laboratory/organization for which you are a member perform testing on this material sample?No Date that the sample was received by the laboratory/organization performing the testingNot set
Sample typeVerification A brief description of the sample3/8HMA aggregate
The quantity of what the sample constitutes16 bags From where was the sample collectedSource
First name of sampler or witnessed bypurvey Last name of sampler or witnessed byShah
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameGranite Construction Company Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-24-0009
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedLos Banos Plans
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/8 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2020-08-04-4
DIME Test ID: 2020-08-04-4-2
Testing Lab: CT D04 - Hayward DME / District Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2020-08-05

Test Results


Input Type: Measured
Tester's full name: Nicholas Shelly
Date of test: 07/08/2020
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 971.4 grams
Mass of the pycnometer with water (B): 662.2 grams
Mass of the oven dried sample (before pycnometer) (A): 493.2 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 493.2 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.585
Bulk specific gravity (SSD Basis): 2.621
Apparent specific gravity: 2.680
Absorption: 1.4 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 8/5/2020