Test 2020-07-21-2-4 (AASHTO T84-14) Summary

Project Information
Project IdentifiersProject ID: 214775
DEA: 081F13U4
EFIS: 0819000074
DIST-CO-RTE-PM08-SBD-62,95-122.0/142.7,9.7/33.6
Work DescriptionCOLD-IN PLACE RECYCLING AND PLACE RHMA-G.
Location DescriptionSAN BERNARDINO COUNTY ON ROUTE 62 FROM 3.8 MILES WEST OF ROUTE 95 TO ARIZONA STATE LINE AND ON ROUTE 95 FROM ROUTE 62 TO 2.0 MILES SOUTH OF TURTLE MOUNTAIN ROAD
Sample Information
Sample Taken Date7/21/2020 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing7/22/2020
Sample typeVerification A brief description of the samplePSUE 3/4" RHMA-G-SP 1% Lime Slurry Aggregate
The quantity of what the sample constitutes8 Bags Of Untreated & 3 Bags Coldfeed Treated From where was the sample collectedManufacturer
First name of sampler or witnessed byLarry Last name of sampler or witnessed byFrancisco
Title of sampler Laboratory sample identification0454G-20
The fabricator/manufacturer/facility nameGranite-Indio Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)SMARA No. 91-33-0072
The fabricator's/manufacturer's product name for the sample3/4 RHMA-G-SP The fabricator/manufacturer designation for the sample
The plant number1557 A detailed description of where the material sample was collectedBelt Cut at Granite Indio Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number JMF Verification ID
Test Details
DIME Sample ID: 2020-07-21-2
DIME Test ID: 2020-07-21-2-4
Testing Lab: CT - Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2020-07-29
Test Results

Input Type: Measured
Tester's full name: Friday Ofoegbu
Date of test: 07/28/2020
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 965.6 grams
Mass of the pycnometer with water (B): 655.1 grams
Mass of the oven dried sample (before pycnometer) (A): 495.8 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 495.8 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity:2.616
Bulk specific gravity (SSD Basis):2.639
Apparent specific gravity:2.676
Absorption:0.8 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 07/29/2020