DIME - Test Summary

Summary for Test 2020-07-02-13-9

Test performed: CTM 202-November 2011

Project Identifiers	Project ID: 213970 DEA: 080K1214 EFIS: 0815000245
DIST-CO-RTE-PM	08-SBD-15-12.5/14.8
Award Date	12/23/2019
Closeout Date	01/18/2022
Work Description	REPLACE PCC PAVEMENT WITH JPCP AND PRECAST JOINTED CONCRETE PAVEMENT.
Location Description	SAN BERNARDINO COUNTY IN FONTANA AND NEAR DEVORE FROM 0.3 MILE SOUTH OF SIERRA AVENUE UNDERCROSSING TO GLEN HELEN PARKWAY UNDERCROSSING
QA Service Level	1 (Verified on 12/12/2019)

Sample Taken Date	07/02/2020	Sample Unique Key	13
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/02/2020
Sample type	Verification	A brief description of the sample	3/8" HMA-A-SP R15 0.50% LAS Aggregate and RAP
The quantity of what the sample constitutes	PSUE 3 Bags coldfeed agg., 2 Bags rap	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Julius	Last name of sampler or witnessed by	Esonwune
Title of sampler		Telephone number of sampler
Laboratory sample identification	0404A-20	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Corona	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0027::CORONA QUARRY
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	Unknown
The plant number	424103 CORD SJR	A detailed description of where the material sample was collected	Belt Cut at Vulcan Corona Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/8 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2020-07-02-13

DIME Test ID: 2020-07-02-13-9

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates

Test Release Date: 2020-07-13

What size aggregate is being tested?: Combined Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

For Combined Gradation only, has the fine aggregate sample been reduced?: No

For Combined Gradation only, use #40 Sieve?: No

Input Type: Calculated

Tester's full name: Satish Jain

Date of test: 07/09/2020

Cumulative percent passing the 3 in. sieve: 100 %

Cumulative percent passing the 2 1/2 in. sieve: 100 %

Cumulative percent passing the 2 in. sieve: 100 %

Cumulative percent passing the 1 1/2 in. sieve: 100 %

Cumulative percent passing the 1 in. sieve: 100 %

Cumulative percent passing the 3/4 in. sieve: 100 %

Cumulative percent passing the 1/2 in. sieve: 100 %

Cumulative percent passing the 3/8 in. sieve: 99 %

Cumulative percent passing the #4 sieve: 75 %

Cumulative percent passing the #8 sieve: 56 %

Cumulative percent passing the #16 sieve: 40 %

Cumulative percent passing the #30 sieve: 28 %

Cumulative percent passing the #50 sieve: 20 %

Cumulative percent passing the #100 sieve: 14 %

Cumulative percent passing the #200 sieve: 9.6 %

General comments (publicly viewable) (Max 1000 characters): Rap Gradation After Ignition Oven

Test was verified on 7/13/2020 ✔