Summary for Test 2014-11-12-8-4

Test performed: CTM 214-August 2010

Project Information

Project IdentifiersProject ID: 209357
DEA: 07284504
EFIS: 0700021180
DIST-CO-RTE-PM07-LA-14-R56.5/R57.0
Award Date04/17/2014
Closeout Date08/02/2018
Work DescriptionLAMONT ODETT VISTA POINT ENHANCEMENT.
Location DescriptionLOS ANGELES COUNTY NEAR PALMDALE FROM 0.3 MILE NORTH OF COURSON RANCH ROAD UNDERCROSSING TO 0.3 MILE SOUTH OF BARREL SPRINGS ROAD OVERCROSSING
QA Service Level1 (Verified on 05/21/2014)

Sample Information

Sample Taken Date11/12/2014 Sample Unique Key8
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing11/12/2014
Sample typeAnnual Source Testing A brief description of the sampleThree eighths inch rock
The quantity of what the sample constitutes4 Bags From where was the sample collectedSource
First name of sampler or witnessed byTom Last name of sampler or witnessed byMilum
Title of samplerQ C Technician Telephone number of samplerUnknown
Laboratory sample identification4310B Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameRobertsons Palmdale Quarry Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-19-0033::PALMDALE
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedStockpiles
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/8 inch
The concrete mix design number Lot numberNot set
Sublot numberNot set HMA Design ID

Test Details

DIME Sample ID: 2014-11-12-8
DIME Test ID: 2014-11-12-8-4
Testing Lab: CT 08 - Fontana Southern Regional Laboratory
Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate
Test Release Date: 2015-02-20

Test Results


What size aggregate is being tested?: Coarse Aggregate
Input Type: Calculated
Tester's full name: Nemencio Daof
Date of test: 12/04/2014
Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data
Percentage Loss of material retained on 1 ½ x 1 in. sieve: no data
Percentage Loss of material retained on 1 x ¾ in. sieve: no data
Percentage Loss of material retained on ¾ x ½ in. sieve: no data
Percentage Loss of material retained on ½ x ⅜ in. sieve: no data
Percentage Loss of material retained on ⅜ in. x #4 sieve: no data
Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data
Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data
Percentage Loss of material retained on 3/4 in. through #4 sieve: no data
Weighted Average Percent Loss of Coarse Aggregate:3.7 %
Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum):no data
Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum):no data
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 2/20/2015