Summary for Test 2020-05-06-30-1

Test performed: CTM 206-October 2011

Project Information

Project IdentifiersProject ID: 214527
DEA: 020H69U4
EFIS: 0218000060
DIST-CO-RTE-PM02-TRI-299-10.9/11.2,42.9/43.3
Award Date01/03/2020
Closeout Date10/05/2021
Work DescriptionINSTALL ROCK FALL DRAPERY
Location DescriptionTRINITY COUNTY NEAR BURNT RANCH FROM 0.4 MILE EAST OF HENNESSEY ROAD TO 0.3 MILE WEST OF BURNT RANCH SCHOOL ROAD AND FROM 0.5 MILE WEST OF CANYON CREEK BRIDGE TO CANYON CREEK BRIDGE
QA Service Level1 (Verified on 01/22/2020)

Sample Information

Sample Taken Date05/06/2020 Sample Unique Key30
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/11/2020
Sample typeAuthorization A brief description of the sampleRock
The quantity of what the sample constitutesRock From where was the sample collectedJob Site
First name of sampler or witnessed byBrian Last name of sampler or witnessed byAlvarez
Title of sampler Telephone number of sampler
Laboratory sample identificationD78426 Linked DIME Sample ID
The fabricator/manufacturer/facility nameOn-Site Transportation Laboratory (TL) Number891126
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)Unknown
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedRock Face
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size1-1/2 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2020-05-06-30
DIME Test ID: 2020-05-06-30-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 206-October 2011: Method of Test for Specific Gravity and Absorption of Coarse Aggregate
Test Release Date: 2020-07-02

Test Results


How will the aggregate be used?: rock slope protection
Input Type: Measured
Tester's full name: TRM
Date of test: 05/14/2020
Mass of Sample + Container (in water): 2846.1 grams
Mass of Container (in water): 0 grams
Mass of Saturated Surface Dry Sample: 4546.4 grams
Mass of Oven Dry Sample: 4504.6 grams
Mass of Sample (in water): 2846.1 grams
Mass of Water Absorbed: 41.8 grams
% Water Absorbed: 0.9 %
Apparent Specific Gravity: 2.72
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/2/2020