Test 2020-06-15-19-4 (AASHTO T84-14) Summary

Project Information
Project IdentifiersProject ID: 213603
DEA: 07301504
EFIS: 0714000020
DIST-CO-RTE-PM07-LA-1,10-R34.6/35.2,R2.1/18.4
Work DescriptionREPLACING CONCRETE AND AC PAVEMENT
Location DescriptionLOS ANGELES COUNTY IN SANTA MONICA AND LOS ANGELES ON ROUTE 1 FROM 0.1 MILE WEST OF MAIN STREET OVERCROSSING TO ROUTE 1/10 SEPARATION AND ON ROUTE 10 FROM ROUTE 1/10 SEPARATION TO ROUTE 5/10 SEPARATION AND AT ROUTE 10/110 SEPARATION
Sample Information
Sample Taken Date6/15/2020 Sample Unique Key19
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing6/23/2020
Sample typeAcceptance A brief description of the sample1/2" RHMA-G-SP 0.5% LAS
The quantity of what the sample constitutes4 bags colfeed agg. From where was the sample collectedManufacturer
First name of sampler or witnessed byVulcan Irvindale Last name of sampler or witnessed byJulio Martinez
Title of sampler Laboratory sample identification0361G-20
The fabricator/manufacturer/facility nameFish Canyon - Irwindale Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)91-19-0035
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedConveyor Belt
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown HMA Design ID
Test Details
DIME Sample ID: 2020-06-15-19
DIME Test ID: 2020-06-15-19-4
Testing Lab: CT - Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2020-06-26
Test Results

Input Type: Measured
Tester's full name: Danilo Ferrer
Date of test: 06/24/2020
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 970.2 grams
Mass of the pycnometer with water (B): 655.8 grams
Mass of the oven dried sample (before pycnometer) (A): 489.9 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 489.9 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity:2.640
Bulk specific gravity (SSD Basis):2.694
Apparent specific gravity:2.791
Absorption:2.1 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 06/26/2020