Summary for Test 2020-05-04-32-3

Test performed: AASHTO T209-12

Project Information

Project IdentifiersProject ID: 214516
DEA: 024H2404
EFIS: 0218000098
DIST-CO-RTE-PM02-TRI-3-32.0/38.0,53.7/63.8
Award Date12/23/2019
Closeout Date02/18/2021
Work DescriptionPLACE HMA (TYPE A) OVERLAY, SHOULDER BACKING, AND TRAFFIC STRIPE.
Location DescriptionTRINITY COUNTY NEAR WEAVERVILLE FROM 0.4 MILE NORTH OF BROWNS RANCH ROAD TO 0.1 MILE NORTH OF RUSH CREEK ROAD AND FROM EAST FORK STUART BRIDGE TO 2.4 MILES NORTH OF EL DORADO WAY
QA Service Level1 (Verified on 01/22/2020)

Sample Information

Sample Taken Date05/04/2020 Sample Unique Key32
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/04/2020
Sample typeAcceptance A brief description of the sampleCombined RAP (1/2-inch)
The quantity of what the sample constitutesUp to Five Days Paving From where was the sample collectedManufacturer
First name of sampler or witnessed byDorell Last name of sampler or witnessed byHarper
Title of samplerConsultant Telephone number of sampler
Laboratory sample identificationD78417B Linked DIME Sample ID
The fabricator/manufacturer/facility nameNorthstate Asphalt, Redding, CA Transportation Laboratory (TL) Number002553
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeReclaimed Asphalt Pavement RAP SourceNorthstate Asphalt, Redding, CA
Aggregate Size1/2-inch Aggregate SourceUnknown
RAP Stockpile Stockpile Size (tons)Unknown
Reclaimed Asphalt Pavement Mix NumberNot set

Test Details

DIME Sample ID: 2020-05-04-32
DIME Test ID: 2020-05-04-32-3
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Test Release Date: 2020-06-22

Test Results


Number of tests: 1
What is the unit of measurement for theoretical density?: US Units
Mass Determination: Air
Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 05/07/2020
Method Performed: Mechanical Agitation - Method A
Mass of container filled with water: 7338.0 grams
Mass of oven-dry sample in air for Sample 1: 1578.0 grams
Mass of container filled with the sample and water for Sample 1: 8295.0 grams
Temperature of Water: 76 °F
Specific Gravity for Sample 1: 2.541
Theoretical maximum density at 25°C (77°F): no data
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 6/22/2020