Summary for Test 2020-04-21-5-1
Test performed: ASTM C39-10Project Information
Project Identifiers | Project ID: 214530 DEA: 042G6904 EFIS: 0400021211 |
---|---|
DIST-CO-RTE-PM | 04-MRN-1-0.0/0.2,0.5/0.8 |
Award Date | 01/08/2020 |
Closeout Date | 05/07/2021 |
Work Description | RECONSTRUCT CONCRETE SIDEWALKS AND DRIVEWAYS. |
Location Description | MARIN COUNTY AT ALMONTE FROM ROUTE 101/1 SEPARATION TO 0.2 MILE NORTH OF ROUTE 101/1 SEPARATION AND FROM 0.1 MILE NORTH OF COYOTE CREEK BRIDGE TO FLAMINGO ROAD |
QA Service Level | 1 (Verified on 11/08/2019) |
Sample Information
Sample Taken Date | 04/21/2020 | Sample Unique Key | 5 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 04/29/2020 |
Sample type | Quality Assurance | A brief description of the sample | 6" x12" cylinder |
The quantity of what the sample constitutes | 14cy | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Janine | Last name of sampler or witnessed by | marr |
Title of sampler | SR | Telephone number of sampler | 510-385-6764 |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Shamrock Materials | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name | Sidewalk |
Material Information
Material Type | Concrete | The concrete mix design number | 4300 |
---|---|---|---|
The truck number from where the sample was collected | 1410 | The batch plant ticket number from where the sample was collected | 186900 |
Concrete batch plant | Shamrock Materials | The fabricator/manufacturer designation for the sample | |
A detailed description of where the material sample was collected | Chute | Where the material sample would have been placed if not sampled | Sidewalk |
From Lot No. | Bag Lot No. |
Test Details
DIME Sample ID: 2020-04-21-5
DIME Test ID: 2020-04-21-5-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2020-06-03
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Measured
Tester's full name: LMC
Date of test: 06/03/2020
Capped in accordance with?: ASTM C617/CTM521
Average diameter of cylinder 1: 6.03 in
Average diameter of cylinder 2: 6.04 in
Maximum load on cylinder 1: 151587 lbf
Maximum load on cylinder 2: 142149 lbf
Type of fracture pattern of cylinder 1: 1
Type of fracture pattern of cylinder 2: 1
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: 1
Age of specimen: 43 days
Cross sectional area of cylinder 1: 28.56 in^2
Cross sectional area of cylinder 2: 28.65 in^2
Compressive strength of cylinder 1: 5308.0 psi
Compressive strength of cylinder 2: 4961.0 psi
Compressive strength (to nearest 10 psi): 5130 psi
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Bluehill Data Point FileTest graph for Cylinder Code 1 of 2
Source: Bluehill Data Point File
Test graph for Cylinder Code 2 of 2
Test was verified on 6/3/2020 ✔