Summary for Test 2020-05-01-12-9

Test performed: CTM 202-November 2011

Project Information

Project IdentifiersProject ID: 214326
DEA: 07310404
EFIS: 0715000001
DIST-CO-RTE-PM07-LA-138-0.0/36.9
Award Date10/17/2019
Closeout DateNot set
Work DescriptionPLACE HOT MIX ASPHALT AND COLD PLANE ASPHALT CONCRETE PAVEMENT. (EPD Pilot Project)
Location DescriptionLOS ANGELES COUNTY FROM ROUTE 5/138 SEPARATION TO ROUTE 138/14 SEPARATION
QA Service Level1 (Verified on 10/29/2019)

Sample Information

Sample Taken Date05/01/2020 Sample Unique Key12
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/06/2020
Sample typeVerification A brief description of the sample3/4 HMA-A-SP R25 Aggregate
The quantity of what the sample constitutes10K Milestone 6 Bags From where was the sample collectedManufacturer
First name of sampler or witnessed byKevin Last name of sampler or witnessed byHopkins
Title of samplerMREA Telephone number of sampler
Laboratory sample identification0210A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameGranite Littlerock Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-19-0008
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R25 The fabricator/manufacturer designation for the sampleUnknown
The plant number2265 A detailed description of where the material sample was collectedBelt Cut at Granite Little Rock Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2020-05-01-12
DIME Test ID: 2020-05-01-12-9
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-05-12

Test Results


What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Satish Jain
Date of test: 05/08/2020
Cumulative percent passing the 3 in. sieve: 100 %
Cumulative percent passing the 2 1/2 in. sieve: 100 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 100 %
Cumulative percent passing the 3/8 in. sieve: 99 %
Cumulative percent passing the #4 sieve: 81 %
Cumulative percent passing the #8 sieve: 61 %
Cumulative percent passing the #16 sieve: 46 %
Cumulative percent passing the #30 sieve: 35 %
Cumulative percent passing the #50 sieve: 26 %
Cumulative percent passing the #100 sieve: 17 %
Cumulative percent passing the #200 sieve: 11.3 %
General comments (publicly viewable) (Max 1000 characters): RAP Gradation After Ignition Oven

Test was verified on 5/12/2020