Summary for Test 2020-04-06-1-4
Test performed: AASHTO T84-14Project Information
| Project Identifiers | Project ID: 209694 DEA: 080J0704 EFIS: 0800000282 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-215-0.6/1.7 |
| Award Date | 10/17/2017 |
| Closeout Date | 04/23/2020 |
| Work Description | (Alternative Delivery) The CMGC project will reconstruct and improve interchange of I-215 and Barton Road in the City of Grand Terrace, CA. |
| Location Description | Grade separation at Intersection of I-215 and Barton Road near Grand Terrace, CA. ? On I-215 between I-10 and SR-60. |
| QA Service Level | 1 (Verified on 12/11/2017) |
Sample Information
| Sample Taken Date | 04/06/2020 | Sample Unique Key | 1 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/10/2020 |
| Sample type | Verification | A brief description of the sample | 1/2 HMA-A-SP R15 Aggregate and RAP |
| The quantity of what the sample constitutes | JMF 6 Bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Vulcan Corona | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0191A-20 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Materials | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0027::CORONA QUARRY |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 1/2 HMA-A-SP R15 | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | 324108 CORD SJR | A detailed description of where the material sample was collected | Belt Cut at Vulcan Corona Plant |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-04-06-1
DIME Test ID: 2020-04-06-1-4
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2020-05-06
Test Results
Input Type: Measured
Tester's full name: Michael Magana
Date of test: 04/17/2020
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 964.1 grams
Mass of the pycnometer with water (B): 654.3 grams
Mass of the oven dried sample (before pycnometer) (A): 493 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 493 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.592
Bulk specific gravity (SSD Basis): 2.629
Apparent specific gravity: 2.691
Absorption: 1.4 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/6/2020 ✔