Test 2020-03-17-7-1 (CTM 202-November 2011) Summary

Project Information
Project IdentifiersProject ID: 212501
DEA: 022E4804
EFIS: 0200000586
DIST-CO-RTE-PM02-SIS-96,263-103.1/103.6,56.8/57.2
Work DescriptionBRIDGE REPLACEMENT
Location DescriptionSISKIYOU COUNTY ABOUT 8 MILES NORTH OF YREKA ON ROUTE 96 FROM 0.5 MILE WEST TO 0.2 MILE EAST OF ROUTE 263 AND ON ROUTE 263 FROM 0.3 MILE NORTH OF SHASTA RIVER BRIDGE #02-0014 TO ROUTE 96
Sample Information
Sample Taken Date3/17/2020 Sample Unique Key7
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing3/17/2020
Sample typeAcceptance A brief description of the sampleFine Aggregate (Sand)
The quantity of what the sample constitutes60 yd (Day's Concrete) From where was the sample collectedManufacturer
First name of sampler or witnessed byChad Last name of sampler or witnessed byEnsminger
Title of samplerARE Laboratory sample identificationD78356
The fabricator/manufacturer/facility nameMountain Ready Mix Transportation Laboratory (TL) Number850978
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure nameAbt 8
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)91-47-0014::MOORES GRAVEL
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedBelt at Plant
Where the material sample would have been placed if not sampledAbutment 8 Primary Aggregate Nominal Sizefine
The concrete mix design numberCT675S Lot numberUnknown
Sublot numberUnknown HMA Design ID
Test Details
DIME Sample ID: 2020-03-17-7
DIME Test ID: 2020-03-17-7-1
Testing Lab: CT D02 - North Region Materials Lab
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-04-06
Test Results

What size aggregate is being tested?: Fine Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Input Type: Measured
Tester's full name: Karen Spliethof
Date of test: 03/18/2020
Cumulative mass retained on the 3/8 in. sieve: 0 grams
Cumulative mass retained on the #4 sieve: 0 grams
Cumulative mass retained on the #8 sieve: 40.2 grams
Cumulative mass retained on the #16 sieve: 176.6 grams
Cumulative mass retained on the #30 sieve: 313.5 grams
Cumulative mass retained on the #50 sieve: 416.1 grams
Cumulative mass retained on the #100 sieve: 472.3 grams
Cumulative mass retained on the #200 sieve: 491.9 grams
Cumulative mass retained on the pan: 510.1 grams
Mass of all aggregate (after wash): 510.1 grams
Cumulative percent passing the 3/8 in. sieve:100 %
Cumulative percent passing the #4 sieve:100 %
Cumulative percent passing the #8 sieve:92 %
Cumulative percent passing the #16 sieve:65 %
Cumulative percent passing the #30 sieve:39 %
Cumulative percent passing the #50 sieve:18 %
Cumulative percent passing the #100 sieve:7 %
Cumulative percent passing the #200 sieve:4 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 04/06/2020