Summary for Test 2020-03-25-2-2
Test performed: ASTM A722-15Project Information
| Project Identifiers | Project ID: 214680 DEA: 030F2854 EFIS: 0319000205 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC-99-7.1/9.4 |
| Award Date | 04/06/2020 |
| Closeout Date | 10/30/2020 |
| Work Description | Construct the temporary bridge superstructures, adjacent paving and pave temporary alignment |
| Location Description | Not set |
| QA Service Level | 1 (Verified on 03/02/2020) |
Sample Information
| Sample Taken Date | 03/25/2020 | Sample Unique Key | 2 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/27/2020 |
| Sample type | Quality Assurance | A brief description of the sample | 1-3/8" Threaded Bar w/ nuts |
| The quantity of what the sample constitutes | 2 bars 4 nuts | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Nicholas | Last name of sampler or witnessed by | Hoffmann |
| Title of sampler | QA Inspector | Telephone number of sampler | 5105429827 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | DSI | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L124-20-20 | Structure unique identifier | |
| Structure name |
Material Information
| Material Type | SMTL TM5 - Threaded Bar | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Threaded Bar Specification | ASTM A722 | Threaded Bar Grade | 150 |
| Threaded Bar Type | Deformed | Rebar Size | |
| Nut Specification for Threaded Bar | N/A | System Manufacturer | DSI |
| Epoxy Coating Color | NA | Threaded Bar Application | Threaded Bar |
| Coating Standards | Uncoated | Bar Heat Number(s) | 6214955103 |
| Nut Heat Number(s) | 71079534, 72076635 | Bar Lot Number | Unknown |
| Nut Lot Number | Unknown | Coupler Heat Number(s) | Unknown |
| Coupler Grade | Unknown |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-03-25-2
DIME Test ID: 2020-03-25-2-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A722-15: Standard Specification for High-Strength Steel Bars for Prestressed Concrete (Tensile)
Test Release Date: 2020-04-02
Test Results
Number of Threaded Bar Samples: 1
Input Type: Measured
Tester's full name: bewing
Date of test: 04/01/2020
UTM: 2000kip
Temperature: 72 f
| Num | Sample | Size | Mfg Lot | Area (sqin) | Tensile Strength (psi) | Stress at Offset (psi) | Total Elongation (%) | Reduction of area (%) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 1 | ASTM A722 Type II Deformed Bar 1 3/8 : 36mm | 1 | 1.58 | 161430.10 | 145.13 | 8.18 | 100 | A722 Threaded Bar and Nut. Nut Hreat 71079534 | bewing |
General comments (publicly viewable) (Max 1000 characters): A722 Threaded Bar and Nut. Nut Hreat 71079534
Test Graph
Source: Bluehill Data Point File
WARNING: strain or stress not found in data points imported from Instron machine.
Test was verified on 4/2/2020 ✔