Summary for Test 2020-01-24-17-1

Test performed: AASHTO T27-14

Project Information

Project IdentifiersProject ID: 210489
DEA: 080F6314
EFIS: 0813000220
DIST-CO-RTE-PM08-SBD-395-11.2/16.6
Award DateNot set
Closeout Date08/19/2021
Work DescriptionThe scope of project is widening approximately 5 miles of US 395 from two lanes to four lanes, repave existing lanes, modify five signals, upgrade ADA access, add turn lanes, add sound walls, and extend bridge
Location DescriptionProject Limits are PM 11.2 from 16.6 and US 395.
QA Service Level2 (Verified on 01/03/2019)

Sample Information

Sample Taken Date01/24/2020 Sample Unique Key17
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing01/29/2020
Sample typeVerification A brief description of the sample1 HMA-A-SP R15
The quantity of what the sample constitutesJMF 16 Bags From where was the sample collectedManufacturer
First name of sampler or witnessed byBlue Diamond Victorville Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0119A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameBlue Diamond-Victorville Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-36-0106::WHITE MOUNTAIN QUARRY
The fabricator's/manufacturer's product name for the sample1 HMA-A-SP R15 The fabricator/manufacturer designation for the sample300222-WM
The plant numberUnknown A detailed description of where the material sample was collectedBelt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size1 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2020-01-24-17
DIME Test ID: 2020-01-24-17-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-03-17

Test Results


What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Husni Ankir , Michael Magana
Date of test: 02/05/2020
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 89 %
Cumulative percent passing the 1/2 in. sieve: 70 %
Cumulative percent passing the 3/8 in. sieve: 61 %
Cumulative percent passing the 1/4 in. sieve: 50 %
Cumulative percent passing the #4 sieve: 47 %
Cumulative percent passing the #8 sieve: 38 %
Cumulative percent passing the #16 sieve: 28 %
Cumulative percent passing the #30 sieve: 17 %
Cumulative percent passing the #50 sieve: 9 %
Cumulative percent passing the #100 sieve: 5 %
Cumulative percent passing the #200 sieve: 2.8 %
General comments (publicly viewable) (Max 1000 characters): Lime Treated Aggregate Gradation

Test was verified on 3/17/2020