Summary for Test 2019-10-14-13-10
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 213744 DEA: 080P3904 EFIS: 0800001025 |
---|---|
DIST-CO-RTE-PM | 08-SBD-18-101.5/115.9 |
Award Date | 02/01/2019 |
Closeout Date | 08/16/2023 |
Work Description | WIDEN EXISTING SHOULDER TO 8' AND CONSTRUCT SHOULDER RUMBLE STRIPS |
Location Description | SAN BERNARDINO COUNTY FROM 0.5 MILE WEST OF ROUTE 395 TO 263 RD STREET. |
QA Service Level | 1 (Verified on 05/30/2019) |
Sample Information
Sample Taken Date | 10/14/2019 | Sample Unique Key | 13 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/16/2019 |
Sample type | Verification | A brief description of the sample | 3/4 HMA-A-SP R12 |
The quantity of what the sample constitutes | 25k Milestone 5 Bags | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Kevin | Last name of sampler or witnessed by | Oluoha |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0634A-19 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | VCM Calmat San Bernardino | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0137::CAJON CREEK |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A-SP R12 | The fabricator/manufacturer designation for the sample | 224108 SBP SJR |
The plant number | Unknown | A detailed description of where the material sample was collected | Belt Cut at Vulcan San Bernardino |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-10-14-13
DIME Test ID: 2019-10-14-13-10
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-05-07
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Larry Diaz, Satish Jain
Date of test: 10/17/2019
Cumulative percent passing the 3 in. sieve: 100 %
Cumulative percent passing the 2 1/2 in. sieve: 100 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 98 %
Cumulative percent passing the 1/2 in. sieve: 79 %
Cumulative percent passing the 3/8 in. sieve: 69 %
Cumulative percent passing the #4 sieve: 52 %
Cumulative percent passing the #8 sieve: 41 %
Cumulative percent passing the #16 sieve: 30 %
Cumulative percent passing the #30 sieve: 20 %
Cumulative percent passing the #50 sieve: 11 %
Cumulative percent passing the #100 sieve: 6 %
Cumulative percent passing the #200 sieve: 3.9 %
General comments (publicly viewable) (Max 1000 characters): Combined RAP/Virgin Aggregate w/Correlation Factors Applied
Test was verified on 5/7/2020 ✔