Summary for Test 2019-03-04-12-3
Test performed: ASTM C88-5Project Information
| Project Identifiers | Project ID: 66666 DEA: APP EFIS: 0019000052 |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for submitting Sample information for Aggregate Pre-approval Program (APP). Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 03/04/2019 | Sample Unique Key | 12 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | Not set |
| Sample type | Aggregate Prequalification Program | A brief description of the sample | 1.5" Gravel |
| The quantity of what the sample constitutes | 120 lbs | From where was the sample collected | Source |
| First name of sampler or witnessed by | Ben | Last name of sampler or witnessed by | Parker |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Vulcan Materials Durbin | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0023::DURBIN |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile Loader Asisted | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1-1/2 inch | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-03-04-12
DIME Test ID: 2019-03-04-12-3
Testing Lab: Vulcan Materials Company - Irwindale
Test Method: ASTM C88-5: Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
Test Release Date: 2019-11-07
Test Results
What size aggregate is being tested?: Coarse Aggregate
Input Type: Calculated
Tester's full name: Robert Davenport
Date of test: 03/04/2019
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Freshly prepared
Mass of sample retained on the 3.5 in. sieve (before immersion): 0 grams
Mass of sample retained on the 3 in. sieve (before immersion): 0 grams
Mass of sample retained on the 2.5 in. sieve (before immersion): 0 grams
Mass of sample retained on the 2 in. sieve (before immersion): 0 grams
Mass of sample retained on the 1.5 in. sieve (before immersion): 0 grams
Mass of sample retained on the 1 in. sieve (before immersion): 0 grams
Mass of sample retained on the 3/4 in. sieve (before immersion): 1494.6 grams
Mass of sample retained on the 1/2 in. sieve (before immersion): 0 grams
Mass of sample retained on the 3/8 in. sieve (before immersion): 0 grams
Mass of sample retained on the #4 sieve (before immersion): 0 grams
Percent loss from sample retained on the 3.5 in. sieve: 0 %
Percent loss from sample retained on the 3.0 in. sieve: 0 %
Percent loss from sample retained on the 2 ½ in. x 1 ½ in. sieve: 0 %
Percent loss from sample retained on the 1 ½ in. x ¾ in. sieve: 2 %
Percent loss from sample retained on the ¾ in. x ⅜ in. sieve: 0 %
Percent loss from sample retained on the ⅜ in. x No. 4 sieve: 0 %
Percent loss from sample retained on the No. 4 x 8 sieve (coarse): 0 %
Percent of split particles between 3/4 in and 1 1/2 in.: 0 %
Percent of crumbled particles between 3/4 in and 1 1/2 in.: 0 %
Percent of cracked particles between 3/4 in and 1 1/2 in.: 0 %
Percent of flaked particles between 3/4 in and 1 1/2 in.: 0 %
Percent of split particles between 1 1/2 in and 2 1/2 in.: 0 %
Percent of crumbled particles between 1 1/2 in and 2 1/2 in.: 0 %
Percent of cracked particles between 1 1/2 in and 2 1/2 in.: 0 %
Percent of flaked particles between 1 1/2 in and 2 1/2 in.: 0 %
Percent of split particles between 2 1/2 in and 3 in.: 0 %
Percent of crumbled particles between 2 1/2 in and 3 in.: 0 %
Percent of cracked particles between 2 1/2 in and 3 in.: 0 %
Percent of flaked particles between 2 1/2 in and 3 in.: 0 %
Percent of split particles between 3 in and 3 1/2 in.: 0 %
Percent of crumbled particles between 3 in and 3 1/2 in.: 0 %
Percent of cracked particles between 3 in and 3 1/2 in.: 0 %
Percent of flaked particles between 3 in and 3 1/2 in.: 0 %
Percent of split particles between 3 1/2 in and 4 in.: 0 %
Percent of crumbled particles between 3 1/2 in and 4 in.: 0 %
Percent of cracked particles between 3 1/2 in and 4 in.: 0 %
Percent of flaked particles between 3 1/2 in and 4 in.: 0 %
General comments (publicly viewable) (Max 1000 characters): Weighted Percentage Loss = 2
Test was verified on 11/7/2019 ✔