Summary for Test 2019-08-27-11-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 212011 DEA: 07252624 EFIS: 0700021272 |
---|---|
DIST-CO-RTE-PM | 07-LA-5-R45.4/R61.2 |
Award Date | 04/17/2017 |
Closeout Date | 01/25/2021 |
Work Description | REHABILITATE CONCRETE PAVEMENT. |
Location Description | LOS ANGELES COUNTY IN LOS ANGELES AND AT CASTAIC FROM 0.2 MILE SOUTH OF ROUTE 14/5 SEPARATION TO 0.7 MILE NORTH OF PALOMAS WASH BRIDGE |
QA Service Level | 1 (Verified on 05/03/2017) |
Sample Information
Sample Taken Date | 08/27/2019 | Sample Unique Key | 11 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/30/2019 |
Sample type | Verification | A brief description of the sample | 1/2 RHMA-G-SP |
The quantity of what the sample constitutes | PSE 4 bags | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | John | Last name of sampler or witnessed by | Dong |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0510G-19 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | All American Asphalt Corona | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0005::ALL AMERICAN ASPHALT |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 1/2 RHMA-G-SP | The fabricator/manufacturer designation for the sample | 106836 |
The plant number | Unknown | A detailed description of where the material sample was collected | Belt Cut at All American San Fernando Plant |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | Unknown | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-08-27-11
DIME Test ID: 2019-08-27-11-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2019-10-15
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Sebastian Ferrer, Satish Jain
Date of test: 09/03/2019
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 94 %
Cumulative percent passing the 3/8 in. sieve: 79 %
Cumulative percent passing the 1/4 in. sieve: 53 %
Cumulative percent passing the #4 sieve: 36 %
Cumulative percent passing the #8 sieve: 16 %
Cumulative percent passing the #16 sieve: 9 %
Cumulative percent passing the #30 sieve: 6 %
Cumulative percent passing the #50 sieve: 4 %
Cumulative percent passing the #100 sieve: 3 %
Cumulative percent passing the #200 sieve: 1.8 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/15/2019 ✔