DIME - Test Summary

Summary for Test 2019-04-22-6-6

Test performed: AASHTO T104-99r16

Project Identifiers	Project ID: 213888 DEA: 024H2704 EFIS: 0218000101
DIST-CO-RTE-PM	02-SHA-44-34.0/43.2
Award Date	03/21/2019
Closeout Date	12/04/2019
Work Description	PLACE HMA (TYPE A) OVERLAY.
Location Description	SHASTA COUNTY AT AND NEAR VIOLA FROM 0.2 MILE EAST OF MILL CREEK ROAD TO 0.8 MILE EAST OF DEER FLAT ROAD
QA Service Level	1 (Verified on 04/03/2019)

Sample Taken Date	04/22/2019	Sample Unique Key	6
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/22/2019
Sample type	Verification	A brief description of the sample	Combined Untreated Virgin 1/2-inch Type A Aggregate
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Anthony	Last name of sampler or witnessed by	Ortiz
Title of sampler		Telephone number of sampler
Laboratory sample identification	D77841F	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Shasta Ranch Aggregates	Transportation Laboratory (TL) Number	736648
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	L190860
The plant number	Unknown	A detailed description of where the material sample was collected	Lab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	JMF 19-11-S1	Lot number	0
Sublot number	0	Aggregate Mix Number	Not set

DIME Sample ID: 2019-04-22-6

DIME Test ID: 2019-04-22-6-6

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)

Test Release Date: 2019-06-25

Percentage of the total sample represented by each size

Size of aggregate being tested: Coarse and Fine Aggregate

What type of solution was used?: Sodium sulfate

What was the condition of the solution?: Previously used

Number of immersion cycles performed: 5

Input Type: Calculated

Tester's full name: Agg Lab

Date of test: 04/22/2019

Percentage of 2 ½ x 1 ½ material loss: 0 %

Percentage of 1 ½ x ¾ inch material loss: 0 %

Percentage of ¾ x ⅜ inch material loss: 1.1 %

Percentage of ⅜ inch x No. 4 material loss: 4.1 %

Percentage of No. 4 x 8 material loss: 5 %

Percentage of No. 8 x 16 material loss: 3.2 %

Percentage of No. 16 x 30 material loss: 5.8 %

Percentage of No. 30 x 50 material loss: 8.1 %

Coarse weighted average loss: 3 %

Fine weighted average loss: 5 %

General comments (publicly viewable) (Max 1000 characters): Composite result.

Test was verified on 6/25/2019 ✔