Test 2019-05-28-14-1 (CTM 673-July 2012) Summary

Project Information
Project IdentifiersProject ID: 88888
DEA: STOCK
EFIS: STOCK
DIST-CO-RTE-PM59---
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
Sample Information
Sample Taken Date5/28/2019 Sample Unique Key14
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing6/3/2019
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes600' From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of sampler Laboratory sample identification
The fabricator/manufacturer/facility nameDS Brown Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)0319236
Manufacturer(s)DS Brown Temperature72
Humidity50 CommentsUnknown
Joint Seal Size2.5
Test Details
DIME Sample ID: 2019-05-28-14
DIME Test ID: 2019-05-28-14-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2019-06-21
Test Results

Input Type: Measured
Tester's full name: Steve
Date of test: 06/07/2019
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 40.169 lbs
Width at 4 x Load at W1: 1.07045 in
Nominal Width: 2.5 in
Measured Maximum Uncompressed Width: 2.766 in
Measured Minimum Uncompressed Width: 2.617 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 2.67 in
Height of Contact Face: 2.477 in
Spec Minimum Uncompressed Width: 2.617 in
Area (5 Times of the Height of Contact Face): 12.385 sqin
Half of the Spec Minimum Uncompressed Width: 1.335 in
85 Percent of the Spec Minimum Uncompressed Width: 2.22445 in
3 Times of the Area: 37.155 sqin
4 Times of the Load at W1: 160.676 in
W1 (US Units):2.224 in
W1 (Metric Units):56.501 millimeters
W2 (US Units):1.07 in
W2 (Metric Units):27.19 millimeters
Satisfactory of MR of (US Units):1.154 in
Satisfactory of MR of (Metric Units):29.312 millimeters
Optional W1 Measurement 1:2.2245 in
Optional W1 Measurement 2:37.4027 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point File
Test graph for 2019-05-28-14-1

Test was verified on 06/21/2019