DIME - Test Summary

Summary for Test 2019-05-15-9-4

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 213740 DEA: 07312604
DIST-CO-RTE-PM	07-LA-5-R77.5/R81.8
Award Date	01/04/2019
Closeout Date	06/04/2020
Work Description	EXCAVATE DITCHES, PLACE PERM MTL, AND CONSTRUCT RET WALLS.
Location Description	LOS ANGELES COUNTY AT VARIOUS LOCATIONS FROM 0.4 MILE SOUTH OF SMOKEY BEAR ROAD UNDERCROSSING TO 0.3 MILE SOUTH OF ROUTE 5/138 SEPARATION
QA Service Level	1 (Verified on 06/04/2020)

Sample Taken Date	05/15/2019	Sample Unique Key	9
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/17/2019
Sample type	Verification	A brief description of the sample	3/4 WMA-A-SP R15
The quantity of what the sample constitutes	JMF 18 Bags	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Vulcan Sun Valley	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0283A-19	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Sheldon, Boulevard, Big Rock Creek	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0017, 91-19-0019, 91-19-0021
The fabricator's/manufacturer's product name for the sample	3/4 WMA A SP R15	The fabricator/manufacturer designation for the sample	220826 SVA SJR
The plant number	Unknown	A detailed description of where the material sample was collected	Manufacturer
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

DIME Sample ID: 2019-05-15-9

DIME Test ID: 2019-05-15-9-4

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2019-06-06

Input Type: Measured

Tester's full name: Larry Diaz

Date of test: 05/20/2019

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 968.7 grams

Mass of the pycnometer with water (B): 655 grams

Mass of the oven dried sample (before pycnometer) (A): 495.7 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 495.7 grams

Test Sample Preparation: Total Saturation

Bulk specific gravity: 2.661

Bulk specific gravity (SSD Basis): 2.684

Apparent specific gravity: 2.724

Absorption: 0.9 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/30/2019 ✔