Summary for Test 2019-05-16-11-1
Test performed: CTM 673-July 2012Project Information
Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 05/16/2019 | Sample Unique Key | 11 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/21/2019 |
Sample type | Quality Assurance | A brief description of the sample | Joint Seal |
The quantity of what the sample constitutes | 300' | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Simon |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Watson Bowman | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 1419227 |
---|---|---|---|
Manufacturer(s) | Watson Bowman | Temperature | 72 |
Humidity | 50 | Comments | Unknown |
Joint Seal Size | 5" |
Test Details
DIME Sample ID: 2019-05-16-11
DIME Test ID: 2019-05-16-11-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2019-06-10
Test Results
Input Type: Measured
Tester's full name: Steve
Date of test: 05/28/2019
UTM: 2KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 120.626 lbs
Width at 4 x Load at W1: 2.01856 in
Nominal Width: 5 in
Measured Maximum Uncompressed Width: 5.1165 in
Measured Minimum Uncompressed Width: 4.972 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 5 in
Height of Contact Face: 4.822 in
Length: no data
Spec Minimum Uncompressed Width: 4.972 in
Area (5 Times of the Height of Contact Face): 24.11 sqin
Half of the Spec Minimum Uncompressed Width: 2.5 in
85 Percent of the Spec Minimum Uncompressed Width: 4.2262 in
3 Times of the Area: 72.33 sqin
4 Times of the Load at W1: 482.506 in
W1 (US Units): 4.226 in
W1 (Metric Units): 107.345 millimeters
W2 (US Units): 2.019 in
W2 (Metric Units): 51.271 millimeters
Satisfactory of MR of (US Units): 2.208 in
Satisfactory of MR of (Metric Units): 56.074 millimeters
Optional W1 Measurement 1: 4.2262 in
Optional W1 Measurement 2: 72.8122 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 6/10/2019 ✔