Summary for Test 2019-01-22-7-3

Test performed: CTM 214-August 2010

Project Information

Project IdentifiersProject ID: 209695
DEA: 08347704
EFIS: 0800000616
DIST-CO-RTE-PM08-SBD-SR-58-0/12.9
Award Date11/10/2017
Closeout Date01/14/2021
Work Description(Alternative Delivery) The CMGC project will upgrade SR 58 from 2- to 4-lanes in San Bernardino County from the Kern County line to 7.5 miles east of US-395.
Location DescriptionSR-58 / 395 Kramer Junction project. In San Bernardino County from the Kern County line to 7.5 miles east of US-395.
QA Service Level1 (Verified on 12/01/2017)

Sample Information

Sample Taken Date01/22/2019 Sample Unique Key7
Will the laboratory/organization for which you are a member perform testing on this material sample?No Date that the sample was received by the laboratory/organization performing the testingNot set
Sample typeAggregate Prequalification Program A brief description of the sample1x4 concrete aggregates
The quantity of what the sample constitutes8, 40 pound bags From where was the sample collectedSource
First name of sampler or witnessed byJohn Last name of sampler or witnessed byJosh Rider
Title of samplerQC Technician Telephone number of sampler626-392-7491
Laboratory sample identification8463 Linked DIME Sample ID
The fabricator/manufacturer/facility nameVulcan San Bernardino Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-36-0137::CAJON CREEK
The fabricator's/manufacturer's product name for the sample1x4 concrete aggregate The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedfrom the shipping face of the 1x4 stockpile at Vulcan Materials Company San Bernardino plant
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2019-01-22-7
DIME Test ID: 2019-01-22-7-3
Testing Lab: Vulcan Materials Company - Irwindale
Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate
Test Release Date: 2019-05-20

Test Results


What size aggregate is being tested?: Coarse Aggregate
Input Type: Calculated
Tester's full name: Ron Longazo
Date of test: 01/24/2019
Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data
Percentage Loss of material retained on 1 ½ x 1 in. sieve: 1.8 %
Percentage Loss of material retained on 1 x ¾ in. sieve: 1.8 %
Percentage Loss of material retained on ¾ x ½ in. sieve: 3.3 %
Percentage Loss of material retained on ½ x ⅜ in. sieve: 2.4 %
Percentage Loss of material retained on ⅜ in. x #4 sieve: 3.3 %
Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data
Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data
Percentage Loss of material retained on 3/4 in. through #4 sieve: no data
Weighted Average Percent Loss of Coarse Aggregate: 2.7 %
Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum): no data
Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum): no data
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/20/2019