Summary for Test 2019-04-10-16-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 213584 DEA: 074W2804 EFIS: 0718000113 |
---|---|
DIST-CO-RTE-PM | 07-VEN-33-6.3/11.2 |
Award Date | 11/09/2018 |
Closeout Date | 06/05/2020 |
Work Description | APPLY SLURRY SEAL COAT AND REPLACE ASPHALT CONCRETE SURFACING. |
Location Description | VENTURA COUNTY NEAR VENTURA FROM 0.1 MILE SOUTH OF PARKVIEW DRIVE TO ROUTE 150 |
QA Service Level | 1 (Verified on 09/10/2018) |
Sample Information
Sample Taken Date | 04/10/2019 | Sample Unique Key | 16 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/15/2019 |
Sample type | Verification | A brief description of the sample | 3/4 HMA-A-SP |
The quantity of what the sample constitutes | PSE 4 bags | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Ezequiel | Last name of sampler or witnessed by | Ortega |
Title of sampler | Granit QC Technician | Telephone number of sampler | |
Laboratory sample identification | 0227A-19 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Granite - Santa Paula | Transportation Laboratory (TL) Number | 913399 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0008::LITTLEROCK |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A-SP | The fabricator/manufacturer designation for the sample | 2126 |
The plant number | Unknown | A detailed description of where the material sample was collected | Belt Cut at 100 Tons |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-04-10-16
DIME Test ID: 2019-04-10-16-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2019-04-30
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Danilo Ferrer
Date of test: 04/16/2019
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 98 %
Cumulative percent passing the 1/2 in. sieve: 72 %
Cumulative percent passing the 3/8 in. sieve: 61 %
Cumulative percent passing the 1/4 in. sieve: 61 %
Cumulative percent passing the #4 sieve: 47 %
Cumulative percent passing the #8 sieve: 31 %
Cumulative percent passing the #16 sieve: 20 %
Cumulative percent passing the #30 sieve: 14 %
Cumulative percent passing the #50 sieve: 9 %
Cumulative percent passing the #100 sieve: 5 %
Cumulative percent passing the #200 sieve: 2.8 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/23/2019 ✔